Brand Name: OMS
Model Number: TDM80-2000B2
Place of Origin: Guangdong, China (Mainland)
OMS flute type punching machine is used for punching holes on the tube walls and flaring in the hole. The result is that the tube looks like a flute. It is mainly applied in the air conditioning industry.
The machine is comprised of a machine frame, a feeding axis, the punching and flaring device, the clamping device, a roary device, a hydraulic system, an electrical system, etc.
This machine is sturdy and accurate. The hydraulic system adopts a special design so the noise is reduced by50% compared with the traditional machine.
The detection system is complete, with original point detection and position limit alarm function.
Its auto counting function enables accurate calculating of processed tubes.
Technical parameters
No. | Item | Content | |||
1 | Max O.D of tube and wall thickness | 80x1,59mm | |||
2 | Max processing tube length | No limitation | |||
3 | Min processing tube length | About 200mm | |||
4 | Closing shape | Round or flat shape | |||
5 | Machining type | Cold rolling | |||
6 | Knife-penetrating control | Servo motor with high precision | |||
7 | Clamp power | Pneumatic power | |||
8 | Electric control type | PLC control | |||
9 | Tube-loading and unloading type | by hand | |||
10 | Machining efficiency | 20 seconds/ pc ,when producing pipe dia.=35mm | |||
11 | Power supply | According to customer's need | |||
12 | Pressure of hydraulic system | 5-7Mpa |