High temperature plastic PI Vespel plate Polyimide Sheet

Material Introduction

HONY® PI polyimide is one of the most heat-resistant and refractory polymer plastics, and it has excellent mechanical and physical properties at high temperatures. Polyimide can be formulated with thermosets and thermoplastics. Polyimide has excellent electrical properties over a wide range of temperatures and humidities. The components of polyimide are also unaffected by dilute acids, aromatic and aliphatic hydrocarbons, esters, ethers, alcohols, freons, hydraulic oils and kerosene.
 

HONY® PI Standard Sizes, Grades, Brands, Types

HONY® PI Size

NameThickness/Diameter(mm)Width × length (mm)

PI3300 Sheet1mm to 5mm150mmx210mm
150mm x 150mm
295mm x 295mm

PI Sheet5mm to 40mm600mmx1200mm

PI Rod4mm to 40mm305mm, 200mm ,1000mm

Name: polyphenylene sulfide
Types: Rods,sheets, Plates
 

HONY® PI6800

HONY® PI6800 material is a composite of polyimide PI, PPS and special inorganic powder. It is better to retain the properties of polyimide PI material and to make good processing performance and dimensional stability of PPS material. HONY® PI6800 has excellent wear resistance, high surface finish, excellent electrical properties, chemical resistance and excellent isotropic mechanical properties, making it one of the most cost-effective materials for precision microporous (less than 0.1mm) materials.
Main features:
● The machining produces very few burrs and very small deformation
● High purity, high hardness but still maintain good toughness, while meeting customer cost requirements;
 

HONY® PI6810

HONY® PI6810 material is a combination of polyimide PI and 15% graphite, which improves the wear characteristics and heat resistance of the material. Suitable for bearings, thrust washers, bushings, seals, sliders and other wear applications.
 

HONY® PI680GP

HONY® PI680GP is a polyimide PI with 15% graphite and 10% PTFE filled for excellent wear resistance with the lowest coefficient of friction under all operating conditions. Typical applications include sliding or linear bearings as well as many of the wear and friction applications listed above.

Note.Remarks
1. Other sizes, colors can be customized.
2. Length, width, diameter and thickness tolerances may vary by manufacturer.
3. Certain grades available in various colors.

● Good thermal stability
● Good chemical resistance
● Excellent mechanical properties
● Low creep and high tensile strength
● Very good heat resistance
● Resistance to weak acidity

● Mechanical stress damper
● Semiconductor test components, processing nesting (nest)
● Microelectronic IC test socket (socket) and contactor (contactor)
● Seals, pumps and valve assemblies, bearings and bushings
● Scientific instrument parts, other electronic components
● Insulation and passivation layers and MEMS chip fabrication in digital semiconductors
● Bushings, bearings, sockets or structural parts of demanding applications