For large warehouse/industrial type applications, KHP High Profile Evaporator models range in capacity from 55 MBH to 265.6 MBH at 10°F TD (based on R404A) for high, medium and low temperature applications.
KeepRite Refrigeration’s KHP model is available in air, electric and hot gas defrost (reverse cycle or 3 pipe) models for -30°F and above room temperatures with high velocity configurations for blast cooler and freezers applications available.
cULus approved and designed for use inside a walk-in refrigerated cooler or freezer, KeepRite Refrigeration evaporator units consist of the casing, evaporator coil, fans and defrost system (air, electric or hot gas). The evaporator systems and electrical control panels are housed within a single assembly with a fan airflow pattern of draw-through design, pulling air through the unit and directing it outwards in a single direction. All of the component parts, options and accessories are provided, mounted, piped and wired (as required) by KeepRite Refrigeration.
Standard features of KeepRite Refrigeration’s KHP Evaporator include generous airflow, a heavy gauge textured aluminum cabinet with galvanized steel hangers, support channels and end plates, heavy-gauge galvanized steel rail motor mounts, hinged drain pan with removable hinge pins, factory-installed solenoid valve wire harness, Schrader fitting and external equalizer line, and a heater safety thermostat, all within a convenient, stackable design.
Optional features include ESP+ Intuitive Evaporator Control Technology, factory mounted TX valve, solenoid valve and thermostat, throw boosters, insulated drain pan, and EC motors. In addition, optional fin spacing, materials and coatings are available to give you the custom evaporator for your refrigeration needs.
