VDE approved electric heating mats for floor radiant heat

VDE  Approved Electric Heating Mats for Floor Radiant Heat

Senphus offer all kinds of electric heating mats, sticky,  no sticky, thin teflon coated or pvc coated, and the color is optional.

Senphus electric heating mat can be installed under any type of floor surfaces, without a risk of overheating. The intelligent thermostat is ideal for improved living comfort in the entire house.

 Senphus Electric Heating Mats Technical Data

Caution:  Radiant Heating Products installed in the suitable area.Avoid Actions which may result in mechanical damage to the product.

Compare with PVC coated and FEP coated

1. PVC coated heating wire mat is a little thicker than FEP coated heating  wire mat

2.The temperature resistance of PVC coated  is 105 degree, and

the temperature resistance of FEP coated is 200 degree.

Compare with Heating Film and Heating mats

1. The useful life of Heating Film is shorter than Heating mats

2. Heating mats can be used 55  years, and we gurantee the warranty 15 years.

Senphus  Electric Radiant Floor Heating Mats of VDE Process Factory Pictures

Installtaion Guide

First , prepare the floor, the floor is clean and dry, you can install the heating mats on the floor directly; you can also install the insulation board and the aluminum foil first.

This video will show installing the insulation board and the aluminum foil first.

Don’t lay the insulation board and the aluminum foil  under the toilet,the bathtub , the floor drain area and other bathroom furniture.

Second, measure up

Third, cut, turn and affix matting system

Don’t lay the heating mat under the toilet,the bathtub , the floor drain area and other bathroom furniture.

Just Remember

Wire should be laid at a minimum of 50mm and should NEVER cross

Never cut the wire

Do not overlap the wire

Wire should be fixed with the tapes or  the clips

The heating mats should be installed on the same level

Test the resistance and the insulation with the universal meter again

Fourth, Installing the Thermostat and Floor Probe

All electrical work should be completed by a qualified electrician

Atop the finished heating mats are cement layer, then the tiles.