Brass fitting . Pressure Snubber

brass adjustable throttling snubber has an adjustable needle valve to restrict flow under varying operating conditions, a temperature rating of 14 to 248 degrees F (-10 to 120 degrees C), a male x female connection with either 1/4" or 1/2" NPT rate, and operates under pressures up to 3,400 psi. The brass wetted parts are for use with non-corrosive liquid and gas pressure. The adjustable stainless steel needle valve restricts flow under operating conditions with variable pressure. The snubber has a nitrile rubber O-ring for a tight seal. It operates under pressures up to 3400 psi, and is effective for applications with pressures above 5 psi. The snubber measures 2.4" (6 cm) high and 1" (2.5 cm) in diameter and has a temperature rating of 14 to 248 degrees F. Pressure gauge snubbers suppress the effects of pressure pulses and pressure peaks to increase the service life of pressure gauges in harsh applications, such as on reciprocating pumps and compressors, hydraulic presses, or fluid power systems, and improve the reading accuracy of the gauge.

Specification: 
Body:Stainless steel or brass

Connection:1/4″ or 1/2″Npt male x female

*Caution:when adjusting the valve, don’t adjust more than two turns from the closed position as leakage will occur.