Hvac air terminals square ceiling 4 way air vent diffuser

4 way square ceiling air diffuser

general Information:

The special design of the range of square and  provides to any kind of space the requirements of decoration which today’s architecture demands.

The broad range of products and possibilities to orientate the air flow in 1, 2, 3 or 4 ways, make them particularly indicated for spaces where a particular zone has to be treated, in geometrically irregular spaces or off-centre parts of the space
( conjunction of wall and ceiling, etc.).

By means of laboratory tests it has been demonstrated that these are ideal for variable volume systems, due to its blade design, with which an adherent jet is obtained (Coanda effect) with a highly satisfactory efficiency,specially recommendable in cold air installations.

All square and diffuser types have standardised neck dimensions for duct mounting according to international standard, suitable for most countries.

Ceiling diffusers direct the air from air conditioning systems into the room. The resulting airflow induces high levels of room air, thereby rapidly reducing the airflow velocity and the temperature difference between supply air and room air. Ceiling diffusers allow for large volume flow rates. The result is a mixed flow ventilation in comfort zones, with good overall room ventilation, creating only very little turbulence in the occupied zone.

Type SCD-VA ceiling diffusers have fixed blades. Horizontal air discharge is four-way.

To give rooms an aesthetic, uniform look, Type SCD-VA diffusers may also be used for extract air.

Similar aluminum square air diffuser

SCD-VA  Extruded punched cores & welding frame, this model is most popular all over the world.

SCD-VB  welding cores & welding frame. This Model can be made into any size

SCD-VC Extruded punching cores & panel frame. This model is as ceiling replacement.

SCD-VA-2&3,  2 way or 3 way square diffuser optional, usually used at corner position:

What is an aluminum 4-way square air diffuser?

•  Material: High quality extruded aluminum profile(A6063)
• Frame & Cores: Thickness 0.8mm,0.9mm,1.0mm,1.2mm
• The frame is made of high quality extruded aluminum profile with advantages of corrosion resistance and rigidity.
• The cores are fixed to the frame with aluminum pipes and pins with steel springs.
• Core can be easily removable and interchangeable for better installation and maintenance. Great convenience for you!
•  We Ventech offer high quality, focusing on details carefully especially in power coated and welding corners details.
•  Automotive powder coated ensures no gaps at the welding corners and provides a good-looking square diffuser for clients. 

Customized-made in size, standard sizes as below:

• Sizes: Customized-made in size , standard sizes as below:
• Neck size:150x150 225x225 300x300 375x375 450x450 455x455
• Height: 50mm
• Face size= neck size+145mm

How to make an aluminum 4-way square air ceiling diffuser?

In order to make a high quality square diffuser, Ventech people introduce a whole production line with advanced stamping, punching machines which are operated by experienced workers.

Firstly, our workers stamp the aluminum profiles, then forward the stamped aluminum profile to punching line. All cores and frames are made by high-efficient machines, then comes to the installation line, we ventech also enjoy the wholly automotive squeezing machines.

Before polishing and filling the putty in the gaps, the air diffuser should be washed for 10mins then baked for 30mins.  Power coated is arranged behind the polishing step, by using totally-closed powder finishing line and parching space, the perfect diffuser rolls off the products line and ready to be packed, QC is the priority during each step of the mass productions. We have professional QC to check quality before products go to next step.

Accessories optional:

• Clips
•      A: installation clip, used for connecting the diffuser/ grille to the celing or wall.
•      B: damper fixing clip, used for connecting the diffuser/ grille to the damper.
• Coner protection
• Holes and screw
•      Insteady of clips, some people prefer punching holes on frame, and instal the diffuser/ grille with screw. 
•  Damper (can be powder coating)
•       OBD-VA, gear manual
•       OBD-VB, screw manual

Notice: The above accessories are optionals. Without any specific requirement, we deliver the products without any accessories. 

•  Ral classic color.
•        -standard Ral 9016 or 9010
•        -other colors optional.
• Anodized
• Matt or smooth surface

•  pack in strong carton, standard pallect, container.
• 10pcs/ctn without damper
•  5pcs/ctn with damper