Mixed Refrigerant-R407c

APPLICATION

R407c is a non-ODP HFC refrigerant replacement for R-22 in positive displacement systems such as new or existing residential and commercial air-conditioning and heat pumps. Offers similar performance tp R-22 and can be used to retrofit R-22 air-conditioning systems.

WARNING

LIQUID AND GAS UNDER PRESSURE. VAPOR REDUCES OXYGEN AVAILABLE FOR BREATHING, CAN CAUSE RAPID SUFFOCATION. INHALATION OR MISUSE OF PRODUCT CAN RESULT IN SERIOUS PERSONAL INJURY OR DEATH. MAY DECOMPOSE IN CONTACT WITH HOT METAL SURFACES TO RELEASE TOXIC, CORROSIVE DECOMPOSITION PRODUCTS. CONTACT OF LIQUID WITH SKIN OR EYES MAY CAUSE IRRITATION AND SERIOUS PERSONAL INJURY OR DEATH.

• Do not inhale vapors.
• Store and use with adequate ventilation, never in a closed space.
• Aviod contact with skin, eyes or clothing.
• Do not store in direct in direct sunlight or heat above 125°F (51.7℃).
• Do not store in damp areas.
• Do not drop or subject this cylinder to rough handling.
• Do not tamper with pressure relief decive or valve.
• Never refill this cylinder with compressed air or any other material.
• Empty cylinder may present hazard-refer to instructions for Disposal.
• For additional safety information, refer to YOUFUSI Material Safety Data Sheet.

FIRST AID

If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Aviod stimulants. Do not give adrenaline (epinephrine). Call a physician. In case of contact, flush eyes promptly with plenty of water for at least 15 minutes. Call a physician. Flush exposed skin with lukewarm water (not hot) - or use other means to warm skin slowly.

INSTRUCTIONS FOR USE

Connect charging hose directiy to value outiet. Do not connect to the high pressure side of any system. 1,1,1,2-Tetrafluoroethane R-134a should not he mixed with oxygen or air above atmospheric pressure for leak testing or any other purpose. A temperature-pressure table is provided on the bottom of this package.

INSTRUCTIONS FOR DISPOSAL

Do not vent residual pressure to the atmosphere Recover residual contents to an internal pressure of 0 psig (bar gauge) or less. Observe all precautions printed on the cylinder labels. After recovery is complete, leave valve open. Do not incinerate. Do not flame cut or weld empty cylinders. Do not reuse. Cylinder should be returned to Metal Recycler for processing.