China ammonia evaporative condenser

Product Application

(Cooling tower, evaporative condenser, air cooling condenser)

Cooling tower, evaporative condenser, air cooling condenser is one of the most important parts of the whole refrigeration system. The condenser condenses the refrigerant gas inside the coil and complete a heat exchange circle. The evaporative condenser is widely applied to cold storage, ice-store, chemical industry, supermarket and etc.

Fan

Adopt domestic famous brand: tongji - Ming brand or other equivalent condenser dedicated fan.
The condenser specialized, axial flow fan with vertical installation, its performance can meet the requirements of the condenser of air volume and air pressure.
The blades adopt high strength fiber blades or hollow aluminum alloy material.

Heat exchanger coil

Use 304 stainless steel, 316 stainless steel, galvanized steel（φ19mm、δ=1.0mm）

Connector use flange

Heat exchanger frame use stainless steel, thickness 2mm, it's painting is the same as condenser frame.

Each set of heat exchange get through pressure experiment, after assembly do 1.0 MPa pressure test in the water, in order to ensure no leakage.

Sink and frame

Sink and frame all use 2mm stainless steel in order to improve the corrosion resistance of material, make the shell plate durable, corrosion. Shell plate connections all adopt 304 anti-skid screw, longer service life and easy to remove.

Water pump

Spray pump, large flow, low head, high efficiency, low noise, small power, is specially for evaporative cooling water pump, its execution according to JIS standard - C4210.
The pump motor voltage 380 v,  IP55 protection grade, insulation class F.
Water pump motor use the well-known brands, service life under normal conditions to run not less than 10 years, the service life of bearing normally run not less than 10000 hours. SKF bearing or NTN brand bearings.

Sprinkler system

A, Can replace the spray parts under working condition
B, Cooling water spray system with large flow blockage type nozzle, to ensure the continuous uniform spraying of water in coil on the surface of the water, the wind let the water under the action of maximum coverage on the coil surface, make sufficient refrigerant water, air and heat exchange, thereby improving the heat transfer effect.

(1) Power-saving; Water-saving; Space-saving
(2) High Heat Exchange Ability
(3) Easy to install
(4) Low maintenance cost
(5) Long lifetime