Manufacturer 150W/M2 Electric Underfloor Heated Mats For Indoor Floor Heating Mat

Floor heating mat is designed for installation into thin adhesive beds, leveling compounds or thin screed beds beneath tiled and wooden floor finish.

1. 150w square meter heating mats are suitable as a primary heating source providing you have adequate insulation. These are our most commonly used mats for kitchens, dining rooms, large bathrooms and most other areas with tiled floors.

2.  200w square meter underfloor heating mats are generally used in areas where high heat loss is a problem, such as conservatories. These mats are only suitable under tiled floors, giving a 25% faster warm up time.

heating element:  Adopting multi-strand in heating wire to gain a better stability.

Insulation Layer: Adopting Teflon (FEP), a application temperature range from -85 200, would not be deteriorated in the extremely temperature from -200 to 260 in a short using time with its excellent chemical resistance, creep resistance and low friction coefficient.

Double Shielding: double earth leakage protection combined copper grid with aluminum foil working with ground protection can resist electromagnetic radiation safely and securely.

Outer Jacket: Adopting Teflon (FEP), a width application temperature range from -85 200, would not be deteriorated in the extremely temperature from -200 to 260 in a short using time with its excellent chemical resistance, creep resistance and low friction coefficient Joint in cold and power line.

Color: White net + red wire  , white net + blue wire , red net + blue cable wire ( can be customized)

The heating mat for underfloor heating /wall heating/roof heating/outdoor heating etc.

Heating mat specification: 

Single conductor heating cable mat Performance:
1, structure
Outer sheath: polyvinylidene fluoride (FEP) or high performance PVC;
Grounding: bare copper wire;
Shield: + copper foil;
Conductor: + copper alloy resistance wire;
Insulation: polyvinylidene fluoride (FEP) ;
Connector type: external connector;
2, size
Diameter: 3.0mm
3, electrical parameters
Power supply voltage: 220V (voltage can be customized);
Linear power: 12W/m
Power density: 100w/m2 150W/m2 200w/m2
4, other
The cold line length: 3m;
The maximum surface temperature of 120 DEG C;
Minimum bending coefficient: 5D.

Double conductor heating cable mat performance :
1, structure
Outer sheath: polyvinylidene fluoride (FEP) or high performance PVC;
Grounding: bare copper wire;
Shield: + copper foil;
Conductor: + copper alloy resistance wire;
Insulation: polyvinylidene fluoride (FEP);
Connector type: external connector;
2, size
Diameter: 3.5 mm
3, electrical parameters
Power supply voltage: 110/220V (voltage can be customized);
Linear power: 12W/m
Power density: 100  200 150W/m2
4, other
The cold line length: 3m;
The maximum surface temperature of 120 DEG C;
Minimum bending coefficient: 5D.

Products floor heating mats in factory:

Production heat mat production showing:

Connect the heating mat with thermostat and power moudle showing:

Feature of our heating mats special for underfloor heating:

Economics affordable, easy to installation, long time durablity without maintainence fee. 

Packaging & Shipping

Application of the heating mats :

it's widely usde as indoor floor heater in europe, such as bathroom, kitchen, dining room, porch, and also suitable for pipe and vessel freeze protection and roof and gutter de-icing applications.

Outdoor applicatioin of the heating mats:

Our Services