suction Filter

Introduction

Suction Line Filter is a specifically designed filter to protect the compressor from dirt and all solid contaminants.

Pass-by valve will work while the refrigerant is flowing according to the arrow, If there is too much pressure drop, the pass-by valve will open a little to keep the enough current and will make the compressor motor get the proper cooling. The pass-by valve will not work if make the wrong installation of the suction filter. It will not open even the pressure drop is very high. In this situation, It will need an access valve to check pressure drop that pass by the core to the compressor suction valve. If the pass-by valve on the suction filter is not working, we can use access valve to check the pressure.

Feature

·To provide the most effective filtration protection for compressor

·Dual access valves for simplify pressure drop.

Little pressure drop in the full flow

·The minimum installation length to adapt the compact place.

·Highly corrosion-resistant power coating finish, can be used in all environments.

Filtration accuracy: 40μm

Maximum working pressure: 3.5Mpa 

Diagram

Specification