Factory supply steel bar quenching and tempering furnace

Applications of quenching and tempering furnace

Steel bar quenching and tempering furnace

Technial parameters of WZP-120 quenching and tempering furnace

WZP-120 quenching and tempering furnace(debugging machine work shop)

our products including

  induction heating machine

  induction coil ( the coil to be made depend on your heating work requirements and the size of your workpieces )

  operation manual

Quenching and tempering furnace Equipment introduction  

1. Difference of quenching and tempering

Quenching is heating metal to certain tempering, immediately water cooling; while tempering is heat metal up to a certain tempering, and then cooling it in air, slowly to room temperature.  

2. Definition of quenching and tempering  

Quenching → Heating work piece to a certain temperature.Cooling rapidly at water, oil, or other inorganic salts, organic aqueous solution etc. quenching medium. After quenching,steel work piece getting hard , but also brittle. 
Tempering → In order to reduce the brittleness of the steel, make the hardened heat preservation, a suitable temperature, higher than room temperature and lower than 710 ℃ , and then cooling.This process is called tempering.

Metal work pieces and induction coils showroom.

We are in induction heating industry exhibition

Packing for  quenching and tempering furnace

1.Wooden cases (plywood) or carton,as you request.

2.Inside,will be filled with plastic foam,for waterproof and shockproof.

3.Accessories: induction coils,foot switch and installing and operating instructions

4.by sea LCL(less than container load) or by air. 

1. Reply your inquiry within 24 working hours
2. Experienced engineer instruct and sales communicate with you in fluent English.
3. According to work pieces specifications, heating requirements, propose best solutions,also reference your ideas.
4. Machine details and working video link for your reference
5. Competitive price ,compare with the same industry
6. Production: strict quality standard, to produce machine and induction coils.
7. Debugging machine and only good machine will be sent.
8. Tracking goods shipping and provide bill of lading,invoice,packing list and other documents what you need
9. Provide install and technology instruction by sending drawings, email, or telephone,video.
10.If you need, will arrange one engineer to your place,instruct install machine and training operators.
11.Excess warranty period(12 months warranty), you can buy the spare parts from us with special discount price.
12.Provide long-terms technical support