ice lolly machine Popsicle Maker for small shop

Hommy Enterpiese Co.Ltd

Popsicle Machine HM-PM-16

Features and Performance:

1. The machine is built with luxury outward appearance and easy operation and low cost of maintenance.
2. Machine inside is made of purity stainless steel that can resist hydrochloric acid eroded.
3. Several types of Popsicle moulds for selection. 
4. Stainless steel mould can resist hydrochloric acid eroded.
5. Mould has auto-shell function and easy to work.
6. Easy to operate.
7. Airproof cover and keep the material use long time.
8. Low capital investments with max production.
9. It can be choosed different material to full in the mould base on selling market.

10. One machine can produce two kinds of goods: Popsicle, ice block.

How to use   popsicle machine  detail  for you  as following :

 1. Pure the brine (saltwater) into the tank of popsicle machine (make sure the consistency should be 28%-30%.)

2.  Turn on the machine and freeze about 2 hours at first time.

     Make sure the temperature of the brine is below -18 centigrade.

3. Mix the popsicle materials and pure them into the popsicle mold

    (down mold). Fasten the sticks on the up mold. Then combine the up mold and down mold.

4. Put the whole set of mold into the tank, make sure the mold could

    a little   float on the brine.

5. After about 10 minutes the popsicle has shaped up.(the time will

    depend on the size of the mold, you'd better have a test, we couldn't

    give you the correct time).

6. Prepare one tank of water and one empty tank when the popsicle

    almost shape up.

    Take the whole mold onto the water you prepare which could

    let the popsicle divorce from the down mold.

    After a few seconds , take out the up mold, and push the handle,

    popsicles will slide down into the empty tank.

    Then you could pack the popsicle immediately.

 Hard ice cream popsicle