Brand Name: YONJOU
Model Number: QJ,SP
Place of Origin: Zhejiang, China (Mainland)
Summarize:
QJ SP Cast iron and Stainless steel 7.5hp 10 hp 15hp submersible pump price is a direct mounted pump combining the motor and pump‘together. It can be used as water suction equipment for groundwater, river, reservoir and canal etc.This pump is mainly used for agriculture irrigation, water supply for human and animal in plateau and mountain area, and water drainage in city, factories, railway system, mining area and construction site etc.
Features:
1.The motor and the pump united as one, working under water, more reliable.
2.No special requirements for the well casing and lifting pipe. (It can work in Steel tubular well, lime well, earth well etc. Within the reasonable pressure range, steel tube, rubber tube and plastic hose can be used as lifting pipe.)
3.Easy to install, operate and maintain, less space demand, no pump house needed
4.Simple structure, less cost
Application:
1.Ground water suction equipment
2.Water lifting in rivers, reservoirs and Canals
3.Agriculture irrigation
4.Water supply for human and animal in plateau and mountain area
5.Water drainage in city, factories, railway system, mining area and construction site
6.Water supply equipment in any possible places
Product details:
| Working Principle: | Centrifugal |
| Pump body material: | Cast Iron, SS304, SS316 |
| Gear material: | 45# Steel, Copper, SS304, SS316,Plastic |
| Temperature range: | Normal ≤ 70 C, Special ≤ 100 C |
| Driver: | Motor engine |
| Power specs: | 220V, 240V, 380V, 400V, 415V, 440V, 460V,660V, 50hz/60hz |
| Max flow rate: | 1000m3/h |
| Max discharge pressure: | 1000m |
| Type of connection: | Quick couple, Thread, Flange |
| Shaft seal type: | Oil seal, mechanical seal, |
| Sliding bearing: | Good aseismic performance |
| Motor Power: | 0.55kw ~ 400kw |
Using Conditions:
(1). 380V voltage deviation is no more than ±5%,frequency is 50HZ, three -phase power deviation is no more than ±1%.
(2). Motor cavity must be filled with water.
(3). The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit
should be less than 70m below the static water level.
(4). The distance from the motor bottom to well bottom must be more than 3m.
(5). Water temperature should be no more than 20°C.
(6). Sand content of the water ( by mass) should be no more than 0.01%.
(7). PH value of water 6.5-8.5.
(8). Hydrogen sulfide content of the water should be no more than 1.5mg/L.
(9). Chloride ion content of the water should be no more than 400mg/L.
(10). Water yield of water source should ensure the requirements of pump continuous working.
Spare Parts:
Zhejiang Yonjou Technology Co., Ltd is one of the leading manufacturers and exporters in the field of industry pumps with manufacturing facilities in mainland China. We are specialized in oil pump, diaphragm pump, diesel engine pump, centrifugal pump, screw pump, chemical pump etc. SEE MORE PUMPS
Verified Supplier - ZHEJIANG YONJOU TECHNOLOGY CO.,LTD
Bussiness Type: Manufacturer 
- Product Listing Policy - Intellectual Property Policy and Infringement Claims
- Related Links
- Privacy Policy
- Terms of Use
ICP License: 浙ICP备2023052164号 © Coowor.com. All rights reserved.
Tel: +86 10 65447649 E-mail: coowor@coowor.com
Copyright © Hangzhou Coowor Network Technology Co., Ltd. All Rights Reserved.
