Brand Name: YONJOU
Model Number: D,XS,S ,YP
Place of Origin: Zhejiang, China (Mainland)
High pressure centrifugal diesel pump
diesel water pump 20bar
Summarize:
1.High pressure centrifugal diesel pump diesel water pump 20bar with semi-open impeller and a Simplex separator where air can separate from the liquid and be sucked by a vacuum pump.
2.The vacuum pump allows the unit to be primed automatically and capable of drawing significant quantities of air, allowing the priming of a wellpoint system and maintaining it under vacuum, or draining an excavation thoroughly under “snore” conditions.
Applications:
Construction | Industrial | Municipal | Agricultural |
Mining | Dewatering | Industrial Waste | Sewage |
Oil Field | Petrochemical | Paper Mills | Processing |
Diesel Engine Specification:
Drive Variation | Cummins, Deutz, Ricardo, Perkins, Chinese Diesel or any others can be specified |
Power Range | 50HP~1066HP |
Diesel Driving | Water cooled, air cooled |
Cylinder | 1, 2, 4 or 6 |
Cylinder Diameter | 95, 96, 100, 102, 105, 110, 113 etc |
Displacement | 3.26~9.49L |
Fuel Consumption | 218, 224, 231, 251.6, 258.4 etc |
Connection Type | Pin Coupling |
Installation Way | Diretly coupling engine mounted, horizontal V-belt |
Skid Mounted on Trailer | 2 wheels or 4 wheels Trailer/Trailor |
Product details:
1. YP Non-clogging Dewatering Pump consists of a self-priming centrifugal pump with semi-open impeller and a simplex separator where air can separate from the liquid and be sucked by a vacuum pump, the max suction head can reach to 9.5m
Pump Model |
YP100 |
YP125 |
YP150 |
YP200 |
YP250 |
YP300 |
Standard Pump Body Material |
Cast Iron | |||||
Standard Pump Impeller Material | Stainless Steel | |||||
Standard Pump Shaft Material |
2Cr13 | |||||
Bearing Type |
Ball | |||||
Maximum Lift in theory (m) |
9.5 | |||||
Nominal Speed (rpm) | 1800 | |||||
Inlet & Outlet Size (mm) |
100 |
125 |
150 |
200 |
250 |
300 |
Max. Dia Solids Handling Capability (mm) |
20 |
26 |
76 |
76 |
50 |
65 |
Max. Discharge Head (m) |
32 |
34 |
42 |
53 |
60 |
55 |
Max. Flow Rate (m3/h) |
150 |
200 |
360 |
540 |
1000 |
1800 |
2. IS Single Stage End Suction Water Pump is for clean water or liquid similar to clean water, with high temperature mechanical seal it can be used to transfer hot water (150 degree celcius). It is used for industrial and city clean water supply and drainage, irrigation, fire protection, water supply, metallurgy, chemical, paper making, etc.
Working Principle | Standard centrifugal, end suction |
Casing Material | HT200, SS304, SS316 |
Impeller Material | HT200, SS304, SS316, Copper |
Pump Sealing | Packing seal, Mechanical seal |
Capacity Range | 6.3-400m3/h (27.7-1760US.GPM) |
Head Range | 125m (410ft) |
Maximum Diameter | 200mm (8inch) |
3. S/XS High Flow Split Case Water Pump with high capacity and pressure, which can transfer clean water or similar liquids (Oil).
Working Principle | Centrifugal, Split Case Pump |
Casing Material | HT200, SS304, SS316 |
Impeller Material | SS304, SS316, Copper, HT200 |
Pump Sealing | Packing seal, Mechanical seal |
Capacity Range | 126m3/h~8520m3/h |
Head Range | 8m~140m |
Inlet/Outlet Diameter Range | 6"(150mm)~32"(800mm) |
4. D High Pressure Multistage Water Pump is used system of high-pressure run hot and cold water circulation and booster pumps in parallel water supply of the high rise building, fire, boiler feed water and cooling water systems and a variety of irrigation fluid conveying.
Working Principle | Centrifugal, Multi-stage |
Casing Material | HT200, SS304, SS316 |
Impeller Material | HT200, SS304, SS316, Copper |
Sealing Type | Packing seal, Mechancial seal |
Flow Range | 3.75-540m3/h (16.5-2376US.GPM) |
Maximum Head | 1056m (3463.7ft) |
Maximum Caliber | 250mm (10inch) |
5. ZX/ZW/SP Self Priming Water Pump is our latest generation product base on US technology and craftwork. It is designed for economical & trouble-free operation in handling solid-laden liquids and slurries.
Working Principle | Centrifugal, Self-priming |
Material | Cast iron, ductile iron, stainless steel, cast steel |
Max. Suction Head | 7.6m |
Sealing Type | Packing seal, Mechancial seal |
Solid Passing | 20.63mm-76.2mm (20GPM~5500GPM) |
Flow Range | 8m3/h~1275m3/h |
Head Range | 6m~63m |
Impeller Diameter | 158.74mm~457.2mm |