Brand Name: Laiyuan
Model Number: LY-HC0911
Place of Origin: Jiangsu, China (Mainland)
50w/m Defrost Cable Resistance Heater Wire
Application Of Resistance Heater Wire:
After the air cooler operates from some times, its blade will freeze, at the time, the Resistance heating wire can be used for defrosting to let molten water discharge out of the refrigerator through the drain pipe.
As the front end of the drain pipe is installed in the refrigerator,defrosted water is frozen under 0℃to block the drain pipe,and heating wire is needed to install to ensure that defrosted water doesn’t freeze in the drain pipe. The heating wire is installed in the drain pipe to defrost and heat the pipe at the same time to let water exhaust smoothly .
Characteristics of Resistance Heater Wire:
1.Complete water-proof design
2.Double-layer insulator
3.Mould pressing knot,flexibility
4.Silione rubber insulator applicable scope: -60℃to +200℃
Heating body |
NiCr or CuNi Alloy |
Length/M |
40W/M |
50W/M |
||
Tail End of Heating Body |
Seal Tail End of Colloidal Silica |
1 |
40W |
50W |
||
Max surface temperature |
200℃ |
1.3 |
52W |
65W |
||
Mini surface temperature |
-60℃ |
1.5 |
60W |
75W |
||
Immersion Withstand Voltage |
AC 2500V V/Min |
2.0 |
80W |
100W |
||
Voltage |
220~230v |
Shape |
Average 7*5mm |
3.0 |
120W |
150W |
Power |
±5% |
Out power |
40-50W/M |
4.0 |
160W |
200W |
Tape body length |
±5mm |
Insulation Ohm |
≥200MN |
5.0 |
200W |
250W |
Tolerance |
±10% |
Leaking Current |
≤0.2MA |
6.0 |
240W |
300W |
Remark:
Generally 50W/M drain pipe heating tape is rather common. When used for plastic drain pipe,the company recommends water pipe heating belt with output power of 40W/M .
Warn:
Do not cut heating cable to shorten the length of cooling tail .