Brand Name: SENPHUS
Model Number: SHHC
Place of Origin: Jiangsu, China (Mainland)
Twin conductor Heating cable:
Senphus twin conductor heating Cable adopts two resistance wire as the conductors.
It is a underground heating system that allows contractors to instantly make on-site adjustments to the floor heating coverage for any room including those with curves and angles.
Senphus twin conductor heating Cable can be also used to heat wet areas such as shower beds and benches or saunas.
Senphus twin conductor heating Cable can be controlled using the same programmable and non-programmable thermostat options as Senphus heating Mats.
The twin conductor underfloor heating cable has a relatively low temperature, but since it is distributed over a large area and the layer is very thin, the level of temperature is enough. 23-24 °C on the floor gives you about18-20 °C head high, this is usually referred to as a low temperature system. The opposite is called the high temperature system, where small areas with relatively high temperatureheats the room. One classic example are wall-mounted radiators.
Twin conductor heating cable models:
Voltage (V) |
Specifications |
Power (W) |
Length (M) |
230V |
SHDN-20-10M(A) |
200 |
10 |
230V |
SHDN-20-15M(A) |
300 |
15 |
230V |
SHDN-20-25M(A) |
500 |
25 |
230V |
SHDN-20-30M(A) |
600 |
30 |
230V |
SHDN-20-35M(A) |
700 |
35 |
230V |
SHDN-20-40M(A) |
800 |
40 |
230V |
SHDN-20-45M(A) |
900 |
45 |
230V |
SHDN-20-60M(A) |
1200 |
60 |
230V |
SHDN-20-80M(A) |
1600 |
80 |
230V |
SHDN-20-90M(A) |
1800 |
90 |
230V |
SHDN-20-100M(A) |
2000 |
100 |
230V |
SHDN-20-120M(A) |
2400 |
120 |
230V |
SHDN-20-140M(A) |
2800 |
140 |
230V |
SHDN-20-160M(A) |
3200 |
160 |
230V |
SHDN-20-180M(A) |
3600 |
180 |
230V |
SHDN-20-200M(A) |
4000 |
200 |
Certificates: