manifold mini air micro pressure gauge wireless pressure gauge

  D5 Mini Digital Differential Pressure Gauge/Controller/Transmitter

D5/ D5P/ D5G/ D5T with the same design as below, power, range, relay, output are optional.

Applications & Features

Specifications

Medium: non-combustible, non-corrosive air, not sensitive to moisture, dust, condensation and oil

Working Temp. : D5:-10~50°C, D5P/G/T:-20~70°C

Medium Temp.: 0~60°C

Temp. Compensation: 0~50°C

Working pressure: overload 10xFS, burst 15xFS

Display: 4 bits LCD, with engineering unit, with backlight (except D5)

Output: 0-10V / 4-20mA(3 wires)

Output load: ≤500Ω(current), ≥2KΩ(voltage)

Digital Output: RS485/Modbus (9600-n-8-1)

Relay Output: 2×SPST,1A/30VDC, or 1x Buzzer

Accuracy up to: ±1.0% FS, see accuracy table

Long term stability: ±0.5%FS /Year
Thermal effect: <0.05%FS/°C(zero), <0.08%FS/°C(FS)

Battery type(D5):
     Power: AA battery X4, recommend LR6 alkaline
     Display update time: selectable for 0.5/1/5/10s(default1s)
     Automatic sleep time: selectable for normal open(on), or1/5/10min(default 1min)
     Battery service life: When display update time=1s and automatic sleep time=on, ≥2 year;

                                          When display time>1s or automatic sleep time≥1min, will be longer.

                                          It also depends on the quality of the batteries.

Power type(D5P/D5G/D5T): 15~28VDC/AC

Long term stability: ±0.5%FS /Year

Thermal effect: <0.05%FS/℃(zero), <0.08%FS/ ℃(FS)

Process Connection: 5mm ID tubing, two pairs(on left or back side)
Keys: 3 touch buttons
Protection: IP65
Weight: 220g(battery type incl. batteries), 180g(power type)

Materials: ABS

Approval: CE
Accessory:  A-S0 is standard. It can be used for surface or panel mount. See details in Accessories.

Models

1. D5/ D5P Models

2. D5G Models

3. D5T Models

Measuring range

Note: 1. 5 engineering units can be set by the key and related LCD will be on

          2. For D5 and D5P,only ranges 3,5,7,8 are available

          3. For zero center models, add "Z " at the end of the model.

              For example, D5T3**Z, means -125-0-125pa. Only ranges 1~6 have this select ion.