4-way 2/4 Tube Ceiling Mounted Cassette Type Air Conditioner, Chilled Water Cassette Fan Coil Unit Ceiling Mounted/Exposed

Cassette Type Air Conditioner Characteristic:

1,4-way air flowing,which can uniform temperature distribution in the room

2,Specially design to avoid the air-short flowing;
3,Thin design unit which can be installed in a limit ceiling
(the Min. thickness is 240mm)
4,Easy to be installed,Low installation cost

Comparing to the ceiling conceal ducted FCU,we do not need to install the air inlet and outlet,and also the ducted connection and insulation.

5,Remote controller is standard and wire controller is optional

6,Auto swing

Using advanced 3D software to design the centrifugal fan with streamline and big diameter turbine.

7,Quiet running

The efficiency of airflow rate, heavy wind volume and low noise is excellent. Because the ventilator wheel is processed to sine strip seam, which enhances its flexibility, and drops the vibration of ventilator during revolving in large scale, simultaneously reduced the motor noise caused by ventilator swinging.

8,High lift water drained pump (750mm),easy to plan the condensate drained pipe.

9,Float switch inside to prevent from leaking

After the water raising to a certainly position, the float switch will act and alarm,then the unit will cut off the 4.2mm water valve or stop the fan motor.

10,Fresh air can be inputed from outside

Fresh air inlet can import some fresh wind from outside, and ensure the quality of indoor air.
Thus, the consumer can share the fresh an clean air to lessen illness

11,Auxiliary duct is available to send part of air to other place,in order to improve indoor temperatuerl air quality.

12,“C”type heat exchanger,blue fin.

"C" type exchanger is helpful to improve the welldistributed of terminal air duct and refrigerate system, make the efficiency of multi flow more even and it reduced the probable of system leak.
Blue fin extremely reduced the coagulate water.

13,The water remain in the tray is easy to drained by manual

There are a rubber plug on the water collecting tray,we can drained out the dirty water by manual.
Because the water remained inside the tray will keep for a long time, then there will be very dirty and there might be lots bacterial inside too,draining out the dirty water is

14,Square panels ,which can choose the direction of inlet/outlet water connection freely.

15,Fan and fan motor is easy to maintain

After take out the air grid of the panel,we can easily take out the eletric box,then the fan and fan motor can be easily taken out too.

16,The dimension of M1 unit is only 590×590mm, which can be installed in a standard ceiling opening.

17,Easily interfaced with most widely used BMS and proprietary supervisory system based on Mod- Bus protocol.

18,Water valve can be installed outside the unit(optional).

Water valve is used to controll the on/off water flowing to the unit,we installed the valve outside the unit ,so the user do not need to installed it by themself.

19,4-tube system is optional

There are both cooling and heating water circle coil inside the unit,so the unit can deal with cooling or heating at the same time.
4pipe systme is always used in the place where need to deal with heating and cooling by refrigeration system at the same time.

↓↓PERFORMANCE OF "M" STYLE CASSETTE TYPE FAN COIL(4-WAY,4TUBE)↓↓

For Knowing More Types Or If you don't know which model is suitable for you, you could send message to us. We have several professional engineers to make a customized solution for you. 

Click to "SEND US A MESSAGE!"

 Packing: standard carton packing, use wooden packing based on the actual situation.
Delivery time: shipped in 15~25 working days after payment.