Cassette Ceiling Fan Coil Unit

 Chilled Water Fan Coil, Horizontal Fan Coil, Concealed Duct Fan Coil Unit, Water Fan Coil Products Description:

The FP series water fan coil units are designed specially to meet the varied requirements of zone cooling or heating using chilled water or hot water. Fan coil can be applied to 2 pipes 2, 3 rows or 4 Pipes 4 (3+1) rows systems to satisfy the requirements of a wide variety of air conditioning or heating purpose application. The FP series is available in concealed versions for ceiling duct installation. This unit is presented as a single block including: fan deck, cooling or heating coil,

The FP series water fan coil units are designed specially to meet the varied requirements of zone removable filter, drip tray, electrical connection box.

Chilled Water Fan Coil, Horizontal Fan Coil, Concealed Duct Fan Coil Unit, Water Fan Coil Main Features:

a) FRAME AND STRUCTURE

Fan Coil Panels & frame are made of galvanized steel, properly punched and punched for fixing both accessories and the unit itself;

b) COOLING OR HEATING COIL

The Coils are made of seamless tubes expanded into aluminum fins in continuous block. The connections have brass headers with female fittings and provided with easily accessible vent and drainage valve;

c) FAN DECK

Fan decks are composed of double suction centrifugal fans with aluminum impellers and 3-speed fan motors. Each motor assembled is dynamically balanced;

d) DRIP TRAY

The drip trays are made from sheet metal treated with polyester powder coating to ensure the resistance to atmospheric agents;

 e) Fan Coil FILTER

Easily removable filter is made of filtering honeycomb polypropylene fabric and supported by an aluminum frame. The filter is installed on the units with plenum only;

f) ELECTRICAL CONNECTION BOX

All electric wires are connected to enclosed electrical terminal block, situated on the same side of the water connections;

g) OPTIONAL

3 speed switch (High-Middle-Low);

ON-BOARD THERMOSTART;

Mechanical or Digital type thermostat for two pipe system use, working mode selection (OFF-Heating-Cooling), ventilation (HIGH-MED-LOW) and room temperature setting.

Chilled Water Fan Coil, Horizontal Fan Coil, Concealed Duct Fan Coil Unit, Water Fan Coil Model Specifications:

2Pipes Fan Coil, Fan Coil Unit, Chilled Water Fan Coil System Technical Specifications:

Notes:

1) H-Fan High Speed; M-Fan Middle Speed; L-Fan Low Speed;

2) *-Cooling and Heating Data are referred to following Conditions:

Cooling: room temperature: 27℃ 50% RH, chilled water temperature: 7/12℃, high speed;

Heating: room temperature: 21℃, water inlet temperature: 60/50℃, high speed;

3) **-Sound pressure measured in anechoic room 1.5 m away from the unit;

4) ***-Power Supply if 60HZ needed, please inform when order.

4Pipes Fan Coil, Fan Coil Unit, Chilled Water Fan Coil System Technical Specifications:

 Notes:

1) H-Fan High Speed; M-Fan Middle Speed; L-Fan Low Speed;

2) *-Cooling and Heating Data are referred to following Conditions:

Cooling: room temperature: 27℃ 50% RH, chilled water temperature: 7/12℃, high speed;

Heating: room temperature: 21℃, water inlet temperature: 60/50℃, high speed;

3) **-Sound pressure measured in anechoic room 1.5 m away from the unit;

4) ***-Power Supply if 60HZ needed, please inform when order.

Founded in 2002, located in International Kite Capital Weifang City, Near Beijing and Qingdo Port. We are professional manufacturer of HVAC Equipments including Chiller (Air Cooled Chiller, Water Cooled Chiller, Water Chiller), Heat Pump (Water to Water Heat Pump, Air to Water Heat Pump, Water Source Heat Pump, Air Source Heat Pump, Ground Source Heat Pump, Geothermal Heat Pump), Fan Coil Unit(Duct Fan Coil, Ceiling Fan Coil, Cassette Fan Coil, Floor Fan Coil), Air Handling Unit (AHU, Ceiling and Cabinet AHU), New Air Heat Exchange Units etc. and Refrigeration Equipments and Parts includingCondensing Unit (Copeland, Bitzer, Danfoss Units etc), Evaporator, Condenser, Compressor Racks etcfor cold storage, freezer, blast freezing. Our products have rewarded of CE, ISO, UL, BV etc international certificate.

We have the advantages:

Quality Assurance

Excellent After-sales Service

Professional Technical Teams

Delivery on Time

Communication in Time

Competitive Prices

So welcome to inquiry us anything you want.

-Projects Design, Issuing the HVAC system drawings;

-Making quotation for the projects;

-Technical Support, System Guidance;

-Engineers sending to overseas for installation;

-Producing high quality equipments for the HVAC, Refrigeration projects;

-Installation, Maintenance Services;