3KG/H Ultrasonic Humidifier

3KG/H Ultrasonic Humidifier

Technical parameters

Model:            ZS-10z

Power Supply:        220/50

Rated Power:          850W

Input Current:          3.8A

Mist Capacity:         ≥3kg/h

Air Volume:             170m3/h

Mist Hole:               Φ110mm×1

Diameter:                 ≤10μm

Net Weight:             39kg

Overall Dimensions:  650×460×610mm

3KG/H Ultrasonic Humidifier Principle

 Songjing humidifier utilize the ultrasonic vibrator to generater the <10um ultramicron when the air surface by the function of air, which made the water atomizing, formed a balance humidity water atomization particle. The particle heat exchanged with fluent air and reached then reached humidifing.

Ultrasonic Humidifier Specification:

* Appearance is hanging outside wall
* Stainless steel body
* Spray plastic processing
* elegant appearance
* easily installation
* standard water inlet/ water drainage valve /overflow
* automatic input water and control water level
* digital humidity automatic control
* set humidity control range during 1%-100%RH, control exact &plusmn; 5%RH, equipment can automatic work during the range, without people management
* for the output pipe, it can reasonablely distribute pipe according to the user, distribute the spray jet in average, seal up among the connector.
* inner adopt atomizing component and no water protection equipment, the atomizing particle size among1-10&mu;m, can floating on the air in a long time.
* no mechanical drive, no noise, no pollution, high atomizing efficiency, energy saving when working

Ultrasonic Humidifier Appliance industry:

* textile: Control the humidity, eliminate static and falling dust
* paper -making: Control the humidity of paper, eliminate the static and falling dust
* computer room: Humidity control and eliminate the static
* electrical industry: Semiconductor factory humidity control and eliminate the static
* Plastic industry and so on: Humidity control and eliminate the static

Applicable Cubage of Ultrasonic Humidifier

Control mode of ZS series Ultrasonic Humidifier

ZS series Ultrasonic Humidifier is automatically controlled by digital humidity controller (with “Z” after the model). Digital humidity controller can be randomly set from 1% RH to 99% RH, and its control precision reaches ±5% RH. Within the set value, the equipment works automatically without personnel attendance. Output pipeline of ZS series humidifier is arranged reasonably according to clients’ humidifying places; spray nozzles are distributed evenly, and joints between pipelines should be sealed. The interior of ZS series humidifier consists of integrated spray components and dry-run protection device. Uniform spray particles are only 1- 10μm in diameter, and suspend in the air for a long time. When ZS series humidifier is spraying, there is no mechanical drive, noise disturbance or pollution. Spraying efficiency is high, failure rate is low, and energy consumption is low. Therefore, this is an efficient, reliable and practical ultrasonic industrial humidifier.

ZS series Ultrasonic Humidifier with Φ110 mm PVC standard pipeline is widely used in following industries

1. Textile industry; 2. Paper mill industry; 3. Computer rooms; 4. Electronic industry; 5. Spray coating industry; 6. Plastics industry; 7. Gun powder industry; 8. Printing industry; 9. Laboratory; 10. Tobacco industry; 11. Heating ventilation industry; 12. Preservation and storage; 13. Food industry; 14. Planting industry; 15. Breeding industry; 16. Artificial landscape