replacement alfa laval stainless steel M10 plate heat exchanger for marine

 Structure principle of plate heat exchanger

plate heat exchanger is a type of heat exchanger that uses metal plates to transfer heat between two fluids. It is composed of fixed pressure plate, flexible pressure plate,top and bottom guid bars,back post, support foot,heat exchanger plate,gasket,roller, tightening bolt,nut, lock washer and frame foot.It is device for liquid of two different's temperture that is going to heat transfer. it is suitable for all industry, such as chemical engineering、chemical fertilizer、medicine、metallurgy、machinery、mine、printing and dyeing and so on.

Plate material 

304 Stainless Steel
This is the lowest cost heat transfer plate material. It has a low corrosion resistance
and is usually only available in a thickness of 0.4mm. This type of heat transfer plate
is typically used on HVAC applications.

316 Stainless Steel
This is the most common heat transfer plate material and is used in many applications.
316 stainless steel has a high corrosion resistance and is typically available in thickness
from 0.5mm up to 0.6mm.

Titanium
This has a very high resistance to chemical attack including most acids, chlorides,sea water,and chlorine chemicals. Titanium is usually available in thicknesses from 0.5mm up to 0.6mm

Hastelloy C276
Other common names: Alloy C276, Hastelloy C, Inconel® C-276 Hastelloy C-276
Hastelloy C276 is a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments.Alloy C-276 is widely used in the most severe environments such as chemical processing, pollution control, pulp and paper production, industrial and municipal waste treatment, and recovery of sour natural gas. Thickness available from 0.6mm to 0.8mm.

SMO 254
Sandvik 254 SMO is a high-alloy austenitic stainless steel developed for use in seawater and other aggressive chloride-bearing media. Thickness available from 0.6mm to 0.8mm

Gasket material

EPDM    EPDM-HT   EPDM-FDA

1.It has good resistance to water, water vapor and superheated water. Water is a material with strong polarity, and EPDM rubber belongs to high molecular alkane, have excellent hydrophobicity, and applicable to gas-water and water -water exchanger

2. Good resistance to weather, ageing, ozone and coldness agent, detergent and ketone, good chemica

3.Resistace to olefine, acid(formic, acetic),oxidizing agent, detergent and ketone, good chemical mediator stability

Attention: EPDM rubber does not have resistance to the corrosion of oil and petroleum base products, or oxidizing acid, aromatic, hydrocarbon, ester, benzene, alkyl or ammonia chemical mediator, and is not applicable to intermittent working condition.

NBR         NBR-HT     NBR-FDA   HNBR

-30-120℃  -30-150℃   -30-120℃    -60-170℃

1.Good corrosion resistance to mineral oil, animal and plant grease and aliphatic hydrocatbon, and applicableto oil -water exchange.

2.Resistance to alkali and mon-non-oxidizing olefine acid corrosion.

3. Good resistance to heat and ageing.It can operate below 100℃ for a long time, and is applicable to oil-water exchange

Attention:butyronitrile rubber does not have resistance to the corrosion oxidizing acid ammonia, hydrocarbon, ester, ketone, halogenated hydrocarbon andother strong solvent. When the temperature is on the high side, the corrosion resistance will reduce greatly.

VITON A   VITON G     VITON FDA

-29-220℃  -29-300℃    -29-220℃

1.Good high temperature resistance.

2.Resistance to oil and petroleum base products.

3.Resistance to all kinds of acid, alkali and salt.

4.Resistance to chemical medicine and strongly corrosive medium.

5. Resistance to corrosion of aqua regia.

Attention: because fluorine rubber is polar rubber, its physical and mechanical properties such as resilience and compression set, and poor. It is not resistance to acetaldehyde, acetone, ammonia and other chemical medium.

Silicon -100-230℃

1. Resistance to high and low temperature

2.Excellent hydrophobicity

3.Excelent insulativity

Butyl   -54-150℃

1. Ultra-strong gas tightness

2.Ultra-strong water resistance

3.Excelelnt resistance to ageing

4.Excellent chemical stability

5.Super corrosion prevention ability

replacement alfa laval stainless steel M10 plate heat exchanger for marine

Main Feature of plate heat exchanger 

1. New desgin & energy conservation
2. Struture compact, easy to clean
3. Protect high temperture
4. High efficiency, light weight
5. Occupy small

Trust start from here.

* 1. Trade Assurance

It's the best choice for buyer----safety funds, on-time shipment & product quality protection. Check all goods are ok then Aibaba will release funds to seller.

2. T/T
3. Visa
4. Western Union
5. Paypal

Transfer heat   walks beside you.

Because of time difference, stay with your side at 24 hours.

PHE Parts

Name: SS316L M10 plate heat exchanger

Brand: Shanghai Jiangxing - replacemnt alfa laval

Company office: Room 502 building 2rd No.789 Tianzhu Road, Jiading district Shanghai China

color brilliancy in painting drying frame, deft design in shape, easy to cleaning, orderly assembling.

PHE plate

Name: stainless steel plate heat exchanger plate

Factory Add: NO.505 building Waiqian Road, Waigang Town Jiading district, Shanghai China
Company office: Room 502 building 2rd No.789 Tianzhu Road, Jiading district Shanghai China

distinct corrugation, superior material stainless steel, highly polished and wide selection.

PHE gasket

Brand: EPDM M10 plate heat exchanger gasket

Factory Add: NO.505 building Waiqian Road, Waigang Town Jiading district, Shanghai China
Company office: Room 502 building 2rd No.789 Tianzhu Road, Jiading district Shanghai China

Our contents of gasket reach 68%, stronger hardness and have good tensile strength, limpid in sight of appearence.

PHE frame

Brand: stainless steel M10 plate heat exchanger for environmental protection

Factory Add: NO.505 building Waiqian Road, Waigang Town Jiading district, Shanghai China
Company office: Room 502 building 2rd No.789 Tianzhu Road, Jiading district Shanghai China

Imput information to computer then cutting match model frame use machine. With dusting, cleaning a series workmanship to finised painting drying.