Brand Name: REFWORLD
Model Number: RW-CV/I
Place of Origin: Zhejiang, China (Mainland)
Applications
Fibre glass insulated CV and CV/I heating cables are
mainly for use in laboratories and in industrial
applications when it is required to heat quickly to a high
temperature. These cables are very flexible but as they
are not sealed they can be used only in a dry
atmosphere, and in compliance with the electrical
protection instructions in force.
To ensure that these heating elements enjoy a long
service life, we recommend using a control device.
Characteristics
• Highly flexible.
• High power: 125 W/m.
• High temperature, up to 450°C.
• Not protected against humidity.
• Minimum bend greater than 10 mm.
• Power cable: standard length 500 mm.
• CV : fibre glass insulated cables.
• CV/I : with stainless steel braid
and earthing conductor
Standard models
height length(mm) | 1 | 2 | 4 | 6 | 8 | 10 |
power(w) | 125 | 250 | 500 | 750 | 1000 | 1250 |
Heating wire: Nickel-Copper or Nickel-Chrome
Insulation Fibre glass braid
Diameter :CV=4.5 mm and CVi=5 mm
Max. power :125 W/m
Voltage Any voltage on request: up to 230 V
Permissible surface :up to + 450°Ctemperature
Power: ± 10 %
Tolerances Diameter: ± 0.5 mm
Length: ± 1 %
Use
Heating cables are series resistors. Consult the pages of
the catalogue devoted to the corresponding general
operating principles, general instructions for use and
accessories.
Connection insulation Fibre glass
Protection Without earth With earth