200 Mesh Plastic Molding Filter

Fuel Pump Micro Mesh Filter

1. SUS316 Stainless Wire of 0.05(dia.)mm 200 Mesh.

2. PPS used.

3. The opening of Mesh is 0.22.

4. This is used for Fuel Pump but prototype.

We are manufacturing various types of metal filter for different kinds of machineries, such as; air conditioner, Vehicles’ parts and other different type’s appliances. We have a customer from different place around the world so we are expanding our products as Japan made.

Please contact us without any hesitation.

We are a metal filter manufacturer with more than 50 years experience and custom order basis. However, we possess a lot of dies. In case your need of filter size matches one of our dies, it'll reduce your cost enormously. So please do contact us for further information.

Our work Flow as below;

Bothered by frequent troubles with machinery?

Your machinery may need some filters.

              Filters are used to avoid unnecessary debris from the line inside of machinery.

If you need some samples, we can provide them. So feel free to ask us!

After inspection by our QC team, filters are packed into plastic bags, and then packaged into cartons.

We can solve your problems!

Bothered by frequent troubles with machinery?

 ↓

The machinery may need some filters to get rid of unnecessary debris.

If you need samples, we may provide them. So feel free to ask us!

We know many types of filters. So we can select the best one or two for you.

Need our consultation from the beginning?

  ↓

We will consult your need of filter and propose the best.

We’ve got a lot of accomplishments from customers.

We have more than 50-year experiences on metal filters. We are a typical Japanese supplier and have worked for major car, house appliance and air-conditioner makers.

Reduce the cost as possible?

  ↓

Yes, it’s possible!

We’ve been working on the cost reduction using automated machines.

Our strongest point is that we consult. So anything you want to know about filters, please ask us!

Before....                                                    After

The filter is used in Refrigerant compressors.

  We are Japanese Metal Filter manufacturer and supplier. Our company was established in 1991 at the present place, but before here; Since 1957 to 1991, we were at Tanuma town, where our factory was started to manufacture Metal filter. Now, we have expanded our company at China and Thailand. In the present, we are aiming to reach world’s no 1 Metal Filter producer for all kinds of machineries.

We are always expecting your positive support .

50 years of continuing experiences and worked together with major car, house appliance and air conditioner makers as good quality in Japan.Processing of enlarge and spread our products to the world, Lets join together and to avoid the pollution by using Filter. Our strongest point is that we consult about our products or if occurred any misunderstanding on using products. So anything you want to know about filters, please ask us anytime.