180W return pump controller

Product Category:
Industrial variable frequency controller - Industrial Variable frequency controller - Water pump drive controller

I. Technical parameters
1. Rated operating voltage range: 220Vac±20% 50~60HZ.
2. Rated input power: 180W.
3. Rated operating environment temperature: -25℃~60℃.
4. Power factor > 85%.
5. Protection mode: PCB surface coated with UV glue.
6. Driving board design pollution level: III.

Ii. Function introduction
1. Constant water circulation.
2. Automatic sleep when the outlet valve is closed.
3. Automatic protection and alarm when the water intake is short.
4. It can remember the running status and configuration of the water pump when it is powered off.
5. You can set to work by time period.
6. Can be set to work according to water temperature.
7. wifi networking is available for remote operation.
8. When the pump works abnormally, it will enter functions such as abnormal protection.
9. Can display the running status of the pump and other information in real time.

Iii. Product characteristics
1. Dc permanent magnet brushless motor speed regulation.
2. Use FOC control scheme, with low noise, low vibration and other advantages.
3. With maximum current limit, maximum speed limit, short circuit protection, overheat protection, undervoltage protection and other multiple protection functions.

Iv. Typical application
1. Faucet hot water circulation to ensure real-time hot water.
2. Floor heating circulation pump.