24 head Hdpe Pe PP Geocell Welding Equipment Automatic Ultrasonic Plastic Welder Production Line

Geocell Welding Machine

Welding heads Number ：14
Bottom welding Number.： 22
Max output power ：2.6-57.2KW±5％
Power for single automatic frequency control ultrasonic generator 3200W
Machine frame size ： 6.2*2.2*2.4m
Machine weight： 5.5T
Rated input power supply： AC380V±5％ 50-60HZ±1HZ
Rated input pressure： 0.8~1.0MPa
Air pressure vessel ：≥0.6~1.0m³
Air pressure flow： 2.5~3.0m³
Height for welding geocell： 50mm-200mm
Width for welding geocell： 1000mm-4500mm
Welding distance ：300-500mm
Welding material： PP、PE、PVC
Max daily production 24 hours ： 2000-4000㎡
The capacity per minute calculated in 200mm sheets ：8-13seconds per piece
Left and right automatic feeding motor power 60mm-0.6kw-4nm
Solder joint moving servo motor power 130mm-1.5kw-15nm
Solder joint moving servo reducer 1：10
Operating power of upper and lower bottom molds 80mm-0.75kw-4nm
The upper and lower bottom molds run the servo reducer 1：4
Welding tank lift servo motor power 80mm-0.75kw-6nm
Stacking platform motor AC380V 550w
Inverter AC380V 550w Low voltage electrical appliances Schneider
Programmable Controllers :FX3U Mitsubishi
HMI touch screen: 10inch
The whole machine is equipped with remote assistance control Wifi -1set
Torch size adjustment method Between :300-500mm
The whole machine slider Taiwan Shangyin 20mm 25mm 45mm
Machine welding cylinder :63x75mm
Taiwan Shangyin complete machine drive screw 20mm 25mm 40mm
Bearing parts of the whole machine Havalo
Welding heads material: titan
Transducer ceramic sheet: Taiwan Risheng
Models of transducer :15Khz
The welding torch adjustment method of the whole machine Each station has a scale above
the quick handle for corresponding adjustment