Home > Products > Air Conditioner > Air Conditioner Parts

Air conditioner copper pipe insulation pipe

Air conditioner copper pipe insulation pipe

Price:

Open price

Min.Order Quantity:

500 Piece

Supply Ability:

100000 Piece per Day

Port:

SHANGHAI, NINGBO,GUANGZHOU, QINGDAO

Place of Origin:

MADE IN CHINA

Payment Terms:

L/C, T/T

Brand:

RETEKOOL

Products Model:

9.52mm

Products Details
Company Profile

Quick Details

Brand Name: RETEKOOL

Model Number: 9.52mm

Place of Origin: MADE IN CHINA

Packaging & Delivery

Packaging Details: packed in seaworthy cartons
Delivery Detail: within 25days

Specifications

Factory 1/4"-1/2" 5m Cheap air conditioner copper and aluminum pipe insulatio kitd

Product Description

Outer diameter	6.35 mm; 9.52 mm;12.7 mm;15.88 mm;19.05 mm
Length	3-10mm
Cu(min)	10%
Wall thickness	0.7-1.2 mm
Insulation pipe thickness	8mm
Elongation(≥%)	40%
Tensile strength(≥MPa)	170
Alloy or not	Alloy
Material	XPE or RUBBER
Application	Air condition or refrigerator

Technical standard of copper aluminum connecting pipe:

(1)Welding point: no pores,cracks,slag,burrs and burn,not fusion,no obvious oxide film,no plug hole without significantly reduced(Φ6.3hole is larger than 3.0mm);

(2)Air tightness: using a high pressure for 4.0MPa pressure for 5 minutes, no leakage;

(3)Pressure: after the air tightness check is qualified, slowly press the pressure to 13MPa,keep for 1 minute, without any cracks ;

(4)Bending: The sample is bent into a curved core diameter of 2 times than the nominal diameter of the pipe,after bending 180 degrees, the pipe does not produce wrinkles and cracks;

(5)Tensile strength: The tensile strength is at 65-118mpa, the pull part is on the side of the aluminum pipe, and the weld is above 10mm;

(6)KTG: Shrink good, sealed accessories have been melted, completely wrapped in copper aluminum joints, the seal can not turn.

Production Flow

Our Advantage

1.A long life: the outer surface of copper-aluminum connecting pipe with a cross-linked polyethylene (hot pipe) so antiseptic treatment to ensure the separation of water and moist air on the corrosion of aluminum tubes, life is more than 20 years.

2. Low cost anti-oxidation: copper-aluminum connecting pipe ends and the valve does not exist Jiechu oxidation corrosion and so easy to produce quality risk, copper and aluminum pipe to connect both ends of the brass, to avoid the occurrence of this problem and achieve a lower cost purpose

3. High cleanliness: as between copper and aluminum pipe without welding, but by cold access connection, to avoid all the high-temperature welding caused by the surface oxide production, so do not need any treatment can achieve cooling pipe The cleaning requirements.

4. Good insulation properties: air conditioning is needed to connect pipe insulation, and to improve the air conditioner's energy efficiency, should further improve the connection pipe insulation performance.

5. Safety performance: copper-aluminum connecting pipe bursting pressure and allow the copper connecting pipe burst pressure to allow the same design pressure are 13.0Mpa

6.Bending excellent performance, easy to install, move machine: aluminum than brass soft, copper-aluminum connecting pipe copper tube design is 1.5 times the wall thickness

Packaging & Shipping

Company Information

Main Professional Exhibition :

We attend many many professional Fairs , such as Canton Fair , CRH , ARH (USA),CHILLVENTA(GREMANY) , MCE(ITALY) , FEBRAVA(BRAZIL)

JINAN RETEK INDUSTRIES INC (JINAN RETEKOOL INC) is a professional manufacturer in China , specializing in refrigeration condenser , evaporator and copper fitler driers.

Our company devoted to innovation and development of refrigeration industry all the time . We take the lead in adopting the new design concept for wire tube condenser that can replace copper condenser .Due to new situation of low carbon and environmental protection , we develop most compact,efficient and highest resistance of salt spray test CO2 refrigerant wire tube condenser.

From year 2012 , our new products roll bond evaporators and fin evaporators ( aluminium evaporator ) are supplied to many different countries' refrigerator factory .These products are eco-friendly , high efficiency and energy conservation .

Our company have advanced manufacture equipment , strong technical team and first class management system . We have more than 30 national patents products & technology . We have been awarded the ISO9001:2008 international quality system certificate , ISO14000, RoHS certificate and UL certificate .

Now our products are mainly supplied to refrigerator/ freezer /water dispenser factories in more than 80 countries , include USA , Italy , Korea ,Russia ,Pakistan,India ,Mexico ,Indonesia ,UK......We also welcome customers all over the world to visit our company and set up business relationship for further development

Basic Information

Business Type: Manufacturer,Trading Company
Main Products: Refrigeration condenser, evaporator, filter drier, access valve, refrigeratio parts. AC insulation tube, insulation sheet, AC refrigeration parts
Location: Shandong, China (Mainland) Asia
Year Established:

Trade Capacity

Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,DDU
Accepted Payment Currency: USD,RMB,EUR
Accepted Payment Type: L/C,D/P,T/T,Western Union,MoneyGram,Credit Card,PayPal,Cash
Nearest Port: ningbo,shanghai

Company Photos

Email to this supplier
To :

Erin Gu | Jinan Retek Industries Inc
*Subject :
Quantity Order:
*Message :

Please enter your message.
Your message must be between 20-2000 characters

+ Add attachments :
Select File (Max 2 files)
Please enter your company name:

Please make sure your company name is entered correctly.
* Please enter your email address:

Please make sure your email address is entered correctly.
* Please enter your mobile phone:

(+) -

Please make sure your mobile phone is entered correctly.

Verified Supplier - Jinan Retek Industries Inc Bussiness Type: Manufacturer,Trading Company
Scale: 51 - 100 People
Country/Region: China (Mainland)/Asia
Established: 2015