PACKAGE TYPE AIR CONDITIONERS - KOMPAKT

PACKAGE TYPE AIR CONDITIONER

KOMPAKT Series

Air Cooled Condenser
Manufactured from copper pipes and aluminium fins.
Copper pipes are blown up by the way of the special
method so as to provide maximum head transfer to the
aluminium fins. In air cooled condensers, the air circulation
is provided by axial fans which are coupled with the motor.

Water Cooled Condenser
Manufactured in Shell & Tube form by fixing the special
high performance copper pipes to grooved steel tubesheet
holes with the tube expander method. For device with water
cooled condenser, water cooling tower and condenser
pump are necessary.

COOLING COIL (Evaporator)
The cooling coil which is manufactured by copper pipes and
aluminium fins has an optimum front area and maximum
heat transfer. The evaporator is designed so as to condense
the humidity in the air while it cools the air passing through
itself.

HEATING COIL
Manufactured by copper pipes and aluminium fins and it
can be mounted on the device if desired. Hot water and
steam can be used as heating liquid. If heating liquid is
not available, electrical heater can be installed as an
option.

RADIAL FAN AND MOTOR
The radial ventilator which is Europe origin, close fin type,
double inlet and which works silently with special bearing
meets the needs and quality so as to satisfy the pressure
loss in the cooler,heater,air filter and air duct which will be
mounted on the device. The ventilator which is connected to
the motor with belt-driven unit , can be driven in various
rotations according to the requirements.

SUCTION GRILL AND FILTER
The filter is made of special material and has a great
cleaning capacity. The dirty filters can be shaked off ,
washed in a solvent and cleaned with pressurized air but
it should be changed with a new one in every 3-4 months.

OUTLET AIR CONNECTION
The device can be equipped with an outlet air connection
if partly air change is required in air conditioned place.
Filter is mounted on the mentioned connection.

COMPONENTS OF THE COOLING CIRCUIT
Drier filter, sight glass, thermostatic expansion valve,
solenoid valve, dual control and shut-off valves are
included on the cooling circuit.

CONDENSER WATER/GAS CONNECTION
Water inlet/outlet connections of condenser should be
connected to water cooling tower in water cooled units.
Copper pipes which are coming from indoor unit should
be connected to Air Cooled Condenser in Air Cooled
Units.

ELECTRICAL CONTROL PANEL
The control panel which is put on the device so as to provide
the full automatic operation of the device is equipped with
enough number of contactors, thermics, fuses and on-off
switchs. Besides, locking system is available for condenser
pumc.

ELECTRONIC CONTROL SYSTEM:
Electronic control system is used on the unit.By means
of this entering and leaving air temperatures,operating
times of compresor and evaporator fan, faults occured
on the system can be seen on the dijital screen and also
optimum efficient operation of the unit is provided.

PLENIUM BOX
Plenium box is mounted to the non-duct connectable units.
Material of the box is same with the main body. A special
grill is mounted in front of the box to distribute the air flow to
the room.