Brand Name: PULLNER
Model Number: PHFL
Place of Origin: China
General Description
PHFL Series High Flow Filter Cartridge is made of diameter 6"(152mm), single open end, without inner core, inside to outside flow direction. Filter body have two types: melt-blown and pleated. And pleated filter is divided into two forms: standard and crescent-shaped. End caps and filter layer using hot-melt welding, no bonding agent, with a wide range of chemical compatibility, can be applied to various fields.
Application:
General Purpose: RO Prefiltration, all kinds process water purification
Industrial: Process fluid, process water, condensed water, coolant, wastewater treatment;
Food and Beverage: Process water;
Petrochemical: Various solvents, chilled water, brine filtration
Power Plant: Supplementary water, condensation water, coolant
Product Features:
* Single cartridge could achieve flow rate 110m3/h
* Filtration systems are 50% smaller than typical size system
* Inside to outside flow direction keeps all of the contamination catched.
Performance Specifications
Dimensions(nominal)
OD |
6” (152mm) |
Length |
20"/40"/60" |
Material of Construction:
Model |
Filter Media |
Support/Drainage |
End Caps |
Seals Material |
PP |
Pleated Depth Polypropylene |
Polypropylene |
Glass Fiber Reinforced Polypropylene |
NBR、EPDM、Viton |
Melt blown Polypropylene |
|
Glass Fiber Reinforced Polypropylene |
||
GF |
Glass Fiber/Polyester |
Polyester |
Glass Fiber Reinforced Polypropylene |
Filter Performance
Micron |
1μm, 5μm, 10μm, 15μm , 20μm, 40μm, 70μm |
Maximum operating temperature: |
Pleated/melt-blown pp: 82℃ |
Pleated glass fiber: 121℃ |
|
Maximum operating differential pressure (Inside to outside flow direction) |
Pleated/melt-blown pp: 3.44bar@82℃ |
Pleated glass fiber: 3.44bar@121℃ |
|
Suggestion pressure for filter replacement |
2.5Bar@20℃ |
Suggestion design flow |
40": 70m3/h |
60": 110m3/h |