Pre-Operation Set-Up
1. Open the relief valve to fully recess the piston, and close tightly.
2. Rotate the yoke fully counter clockwise to bottom out the adapter seat.
Operating Instructions
1. Remove pin and open top yoke.
2. Select correct die set.
3. Insert the die into yoke.
4. Position fitting and hose in the crimper and close the yoke.
5. Insert pin securely.
6. Turn body of tool clockwise until dies are snug against hose fitting.
7. Turn hydraulic valve to CLOSE position.
8. Pump handle to crimp fitting onto hose, continue pumping until handle comes to a stop.
9. Once crimp is complete, turn hydraulic valve to OPEN position.
10. Turn tool counter clockwise until top yoke can be rotated away from piston portion of yoke.
11. Romove holding pin and open yoke.
12. Remove hose assembly.
Verified Supplier - Innerco Industy & Trade Co.,Ltd
Bussiness Type: Manufacturer 
- Product Listing Policy - Intellectual Property Policy and Infringement Claims
- Related Links
- Privacy Policy
- Terms of Use
ICP License: 浙ICP备2023052164号 © Coowor.com. All rights reserved.
Tel: +86 10 65447649 E-mail: coowor@coowor.com
Copyright © Hangzhou Coowor Network Technology Co., Ltd. All Rights Reserved.
