HZSS high-efficiency customized double pipe tube in tube copper Coaxial coil heat exchanger for chiller condenser or evaporato...

Product Application

Coaxial heat exchanger consist of one spiral grooves inner tube and a outer tube. Cold liquid and heat liquid flow in the gap that between inner and outer tube or in inner tube separately

Main Features

(1) Anti freezing
Water is not easy to get frozen because water is in a turbulence state as flow in the spiral groove inner tube at low speed. And the special spiral groove sturcture of inner tube makes the inner tube has a ability of flexibility, so it will not risk of frost crack.
(2) Self cleaning, no block
Fluid flow helically to scour the surface, so the coaxial heat exchanger has a bility of self cleaning. And the coaxial heat excahnger's performance is stable and has less attenuation. The sectional area of water passway is bigger so it allowed silt, fiber of big diameter to get through without get blocked. The passeay of water is clean because spiral grooves inner tube makes water flow in turbulence state that will clean the surface.
(3) Less welding points, higher pressure stand, more reliable >
Because sipiral coaxial heat exchanger has few welding points with easy processing, the welding quality is easy to control. And it has little risk of leakage that may cause by prolonged vibration, pressure fluctuation, cold and heat alternation.
(4)High efficiency
Spiral grooved structure can have the effect of strengthening heat transfer on both sides. Both the axial flow of fluid in the tube and the screw rotating flow will exacerbated fluid mixing near the wall, which will enhance the turbulence intensity, increased heat transfer coefficient.
(5)Enhanced heat exchanging 
① There are net dentation that will enlarge the contact area of fluid and inner tube surface.
② Net dentation can highten the turbulence and increase the Reynolds Number, so it will decline the thick of boundary layer of fluid.
As a consuquence, heat transfer coefficient is higher, heat transfer amount in 1 unit volume is more and heat transfer performance is much better.

(6) Long serve life
When the refrigeration system in practice, due to temperature fluctuation, start-stop cycle, heat pump defrost, expansion valve regulation and other factors, internal pressure is frequently alternating condition. Under the constant vibration and pressure changes, the spiral coaxial heat exchanger is much more capable of resisting pressure shock and pressure shock than the plate heat exchanger, so it can adapt to the complexity of the actual working conditions.

Production process of product

Production process of product

Product cleaning 

Production process of product

Product helium test

Production process of product

Product electrophoresis

Packing & Delivery.

All the products sent abroad are packed in wooden cases, the packing is strong, the sealing performance is strong. Ensure that the product is intact.

Welcome to inquiry.

Tel:15656540867

Eamil:gjb9 at hzssjn.com

Linkedin:Rachèle Guo