Ammonia Pump (Shield Motor Pump)

##Shielded electric pump

*allowable temperature: -35°C to +40°C
*viscosity of medium: less than or equal to 50CP
*design pressure: 1.6MPa
*supply voltage: 380v, 50HZ
*flow rate: 2.5 to 18.5 m³/h
*head of delivery: 30 to 100m
*motor power: 3.0 to 7.5kw
*recycle design: pump suction inlet>>>impeller suction>>>impeller discharge>>>front end housing ostiole>>>impeller balance hole>>>between front graphite bearing and axle sleeve>>>between stator shield and rotor>>>between back graphite bearing and axle sleeve>>>rear end cover>>>return line>>>fluid reservoir

Product Overview
    NO LEAKAGE
     Handles toxic,explosive,expensive,hazardous,carcinogenic and corrosive fluids without leaking.
    AIRTIGHT
     Designed to handle vacuum services or fluids that react to contact with air.
    NO SHAFT SEAL
     No mechanical seal.No gland packing.
    NO EXTERNAL LUBRICATION
     Pumped fluid provides cooling and lubrication of motor and bearings.No lubrication levels to check or maintain.
    COMPACT DESIGN
     Motor and pump are single unit,no alignment necessary.No grouting or elaborate foundation.
    QUIET OPERATION
     Low noise level since no fan is used to cool motor.All rotating parts are within a think shell container.