Steam Heating Food Retort / Sterilizer Special for Alfalfa Meat
1. Product Description
A. It is high pressure and the transferring temperature is much higher than the boiling water.
B. It uses certain medium (called as heating medium or sterilization medium) as a tool to transfer heat for product. The medium can be steam, hot water and the mixture of the steam and air.
C. Some systems use over 0.1MPa excessive pressure during sterilization and cooling to maintain the integrity of the container and balance the pressure inside the tank. It aims at semi-rigid plastic container with heat sealing, soft bag, metal plate, cardboard and glass containers.
2. Applicable Scope:
Suitable for meat, eggs, corn, peanut,vegetables, bean products, aquatic products, edible fungus and other food sterilization. Mainly used for meat canned food.
Canned Food: Tin canned, aluminum cans (almond, walnut, healthy tea beverage etc.)
Soft Packaging: aluminum foil bag, transparent bag, vacuum bag, high temperature cooking bag
3. Features:
A.Save energy: The working medium used in the sterilization process can be recycled, and the production cost is reduced.
B. High temperature and short time sterilization: By the hot water circulation of double pot, heating the water to the required sterilization temperature, shortening the time and improving the working efficiency.
C. Uniform flow exchange mode and temperature, no dead angle: During the sterilization process, the circulating water in the pot is switched on and off, which ensures the heat distribution uniform from the heating, the heat preservation to the cooling so that the quality of the products is more stable and lasting.
D. The temperature in the sterilization process has always been stable in all stages, to ensure the qualified rate of F value.
E. The automatic control system: The whole sterilization process is controlled by computer PLC, without manual operation. The pressure and temperature displays in the digital. Users can program all kinds of pressure and temperature mode applied to any product into the computer.
F. Users can set several stages heating mechanism, stored with 100 sterilization formulas.
4. Technical Parameters:
This model is SC12-2.B.3, inner diameter is 1200mm, vessel length is 2000mm, Outside measurement is 2800mm long, 1400mm wide, 2000mm high. The thickness of autoclave is 5m, max working pressure is 0.3Mpa and max working temperature is 145℃.
Water bath autoclave/retort/sterilization pot |
|||||||||
Model No. |
Outside Measurement(mm) |
Inner Diameter(mm) |
Vessel Length(mm) |
Capacity(m³) |
Thickness of Autoclave(m) |
Max Working PRE.(Mpa) |
Max Working TEP.(℃) |
||
Length |
Width |
Height |
|||||||
SC.12 -2.B.3 |
2800 |
1400 |
2000 |
1200 |
2000 |
2.65 |
5 |
0.3 |
145 |
Water Pressure Test Before the Insulation
Pressure to test the water, check there is leak or not in the tank.
If there is serious water leakage, stop the water pressure test and repair it.
Insulation process of the autoclave
Firstly, drilling holes used in the following steps in the tank in advance.
Secondly, put steel rings welded on the tank. The rings are used to fix the mineral wool.
Thirdly, use mineral wool, the material of which is aluminium silicate, to wrap around the tank body for preservation.
Lastly, use insulation board to be welded around the tank. It is finished.
6. Packing & Delivery:
We will deliver your goods by LCL/20'FCL/40'FCL depending on your order.
Before delivery, our professional technician will do trial run for each product to make sure no problem, you can come to our factory and test our machine together with us.
When loading, our workers will fix the retorts tightly with steel wire rope so that the retorts can't move arbitrarily in the container.
>One year free warranty
>Technician-online support
> E-mail, CD/ DV or software to solve detailed questions.
8. Our Certificates
9. Company Introduction
Shandong Zhongtaida Industrial Equipment Co. Ltd. is a key enterprise which design, research and produce high temperature sterilization pot and sandwich pot. There are 150 staff in which there are 5 senior engineers, 8 intermediate engineers, 10 designers, and other 65 technicians with professional knowledge and operating skills. Over the years, our autoclaves and sandwich pot sells well in China, Russia, Southeast Asian countries, winning the praise of customers at home and abroad. LONGWANG autoclaves have computer full-automatic/semi-automatic showering autoclave, computer full-automatic/semi-automatic double-layer water-bath sterilizer, single layer water-bath autoclave, single layer steam autoclave, double-connecting full-automatic/semi-automatic autoclave, hot water type sterilization, electric &steam autoclave, electric heating sterilization for laboratory, universal cooking sterilizing, rotating type autoclave and so on more than 10 series and 200 varieties. We can also design non-standard products according to the different needs of each user specifically.
Our workshop:
Our Company:
Verified Supplier - Shandong zhongtaida Industrial Equipment Machinery CO.,LTD
Bussiness Type: Manufacturer 
- Product Listing Policy - Intellectual Property Policy and Infringement Claims
- Related Links
- Privacy Policy
- Terms of Use
ICP License: 浙ICP备2023052164号 © Coowor.com. All rights reserved.
Tel: +86 10 65447649 E-mail: coowor@coowor.com
Copyright © Hangzhou Coowor Network Technology Co., Ltd. All Rights Reserved.
