Water Spray Food Sterilizer Retort For Spiced / Halogen Eggs

Product Description:

The pot is mainly composed of the horizontal body, the heat exchanger, the circulating water pump, the pipeline and various valves, as well as the automatic control system. It is divided into top pouring type, side spray type and full spray type. In this way, the hot water is sprayed out of the spray nozzle and pipe to the surface of the food. No dead angle.

Applicable Scope:

Mainly applicable to canned food (such as meat, fish, eggs, vegetables etc.), protein beverage (milk, soy milk, coconut milk, peanut milk, walnut milk, almond milk etc.), hard cans (tin cans, glass bottles, cans etc.) and various kinds of soft packaged food.

Working Principle:  

Inject a small amount of water into the steam sterilization pot to reach a predetermined position (not soaking products). Put the water into the spraying pipe through the efficient circulation pump-filter-efficient heat exchanger. Then the hot water is sprayed to the surface of food through the spray nozzle, making the heat distribution evenly without dead angle. 

Principle Diagram

Technical Parameters

This model is PLJ14-3.B.3, inner diameter is 1400mm, vessel length is 3000mm.The total length, width and height is 3938mm, 1600mm, 1880mm. The working capcity is 4.6 cubic metres. The thickness of the autoclave is 5m with 0.3Mpa and 147℃.      

FAQ: 

Q: Are you manufacturer or trading company?

A: We are a professional manufacturer.

Q: Where is your factory located?

A: Our factory is located in Zhucheng, Shandong, China. From Qingdao where closes to us 1.5 hours to Beijing, 1.75 hours to Shanghai, 4.5 hours to Guangzhou by air.

Q: What is your business scope?

A: There are three categories, such as kettle, rubber vulcanization and food sterilization pot.

Q: How could we confirm the details of the products?

A: We will provide all the drawings for you to confirm or you can come here to conduct investigation.

Q: Will you charge us for drafting if we have special requests?

A: No, we will not. Free of charge to make a draft or offer.

Q: How long the warranty will be?

A: 1 Year warranty.

Q: How about the installation? And what if the machine goes down?

A: We will do that. There are two options.

a. We could appoint our engineer to your company to debug and repair, as for the cost of this trip such as ticket, visa, accommodation and labor cost shall be on your side.

b. On-line service will be provided. If still is under guarantee period, the necessary accessories and parts will be provided free, but the transportation cost of it shall be on your side.

Q: Do you take L/C?

A: Yes, we accept L/C, T/T and irrevocable L/C payable.

Q: Can we become your distributor in our country?

A: Yes, welcome you! More details will be discussed if you are interested in being our agent.

Product Pictures

Cross Spraying Type Autoclave

Showering Type Autoclave

Used equipment and facilities

Reeling Machine

Water Pressure Test

Pressure to test the water, check there is leak or not in the tank.

If there is serious water leakage, stop the water pressure test and repair it.

 Insulation process of the autoclave

Firstly, drilling holes used in the following steps in the tank in advance.

Secondly, put steel rings welded on the tank. The rings are used to fix the mineral wool.

Thirdly, use mineral wool, the material of which is aluminium silicate, to wrap around the tank body for preservation.

Lastly, use insulation board to be welded around the tank. It is finished.

Packaging &Shipping

Before delivery, our professional technician will do trial run for each product to make sure no problem, you can come to our factory and test our machine together with us.

When loading, our workers will fix the retorts tightly with steel wire rope so that the retorts can't move arbitrarily in the container.  

Here is our Business License and Manufacture License of Special Equipment

Company Introduction

 Shandong Zhongtaida Industrial Equipment Co. Ltd. is a key enterprise which design, research and produce high temperature sterilization pot and sandwich pot. It is a fixed-point production unit of the People’s Republic of China D class pressure vessel covered an area of 120 acres and 23000 square meters workshop. There are 150 staff in which there are 5 senior engineers, 8 intermediate engineers, 10 designers, and other 65 technicians with professional knowledge and operating skills. Over the years, our autoclaves and sandwich pot sells well in China, Russia, Southeast Asian countries,winning the praise of customers at home and abroad. LONGWANG autoclaves have computer full-automatic/semi-automatic showering autoclave, computer full-automatic/semi-automatic double-layer water-bath sterilizer, single layer water-bath autoclave, single layer steam autoclave, double-connecting full-automatic/semi-automatic autoclave, hot water type sterilization, electric &steam autoclave, electric heating sterilization for laboratory, universal cooking sterilizing, rotating type autoclave and so on more than 10 series and 200 varieties. We can also design non-standard products according to the different needs of each user specifically.

Our Workshop

A corner of our company