HY FSJG Oblique Flow Fan of Glass Fiber Reinforced Plastics

HY-FSJG Oblique Flow Fan of Glass Fiber Reinforced Plastics

• Model:  HY-FSJG  Series

Summary

1. HY-FSJG Diagonal-flow Fan of Glass Fiber Reinforced Plastics, it is a new type fan of high efficiency and energy-saving which is developed by our company. It is the update product of axial flow fan and mixed flow fan. It has the both advantages of the high pressure factor of centrifugal fan and large airflow volume factory of axial flow fan. The directions of air inlet and air outlet are on the same axis and the diameters of them are same. It can be installed directly on the duct without a 90^o turning. Its floor space is small and it is suitable for pressurization, air supply and exhaust of straight pipeline.
2. Because the fan’s different mode has different of flow and pressure, it is equipped with many kinds of latest-development blade. Due to the smaller taper of running hub, it can avoid the flow separation caused by the big bulge between rotor hub and back guiding blade hub, thus increase efficiency and decrease noise to meet the design requirements. This provides a variety of choices for design departments and construction units. 

Operating conditions

Operating temperature: -20~+50℃

Humidity: <90%;

Medium conditions: Air (Dust content is less than 100mg/m³);

Power supply: Three phase, 380V/50Hz or Single phase, 220V/50Hz

Applications

It is widely applied in these ventilation sit of mining, enterprises, hotels, museums, stadium, and so on. It's best suitable for pressurization, air supply and exhaust of pipeline, as well as the ventilation of high buildings.  

Instructions of model code 

HY-FSJG Diagonal-flow Fan of Glass Fiber Reinforced Plastics (Drum Type)

—S: Double speed; —BX: Silencing

Dimension of Diagonal-flow fan HY-FSJG Series