Brand Name: JIEDA
Model Number: JD20 2200W
Place of Origin: Henan, China (Mainland)
to get 95℃ boiling water in flowing rate 480ml/minute
Product Description
Thick Film is one of today’s most innovative and forward-looking solutions for heating technology.
Precisely manufactured thick film heating elements feature a quick temperature rise, an extremely low thermal capacity and minimum temperature fluctuations. Their high efficiency is 97%.
Thick film heating elements feature very high surface power density(up to 60 W/cm2).
Suitable for applications where extra fast heating of flowing liquid is required. Ideal heat transfer is guaranteed by flowing of liquid through all inner surface of the heating element.
Installation and Use
As this is a new type tubular structure water flow instant heating element, it can connect with water route directly.
SUS444 Thread Connector can be welded on the heater tube.
In order to mount it easily, we assemble plastic housing, PP end caps, thermostats (prevent dry heating), NTC sensor, wire leads. It can be mounted by side or two ends.
Product Characteristics
Compared with other immersion water heater elements, Jieda Thick Film Heating Tube/Element are advanced in bigger heat area, higher power density, faster temperature ramp up (80℃/S).
As a new product in the Andetong series, JD20 is small size, easy to control and fully equipped,and it has stable performance just like other products in the series. It not only safe and endurable also is “the most compact instant type heating element” in the world.
Dimension |
161mm*48mm*33mm |
Heat Density |
>40W/cm² |
Ramp-Up Rate |
150℃/s |
Thermal Efficiency |
≥97% |
Heating Power |
2,200W |
Service Life |
>10,000 hours |
Rated Voltage |
220v |
Certificate |
CQC, RoHS |
Dielectric Strength |
1,500V/5mA/60s |
Power Deviation |
-10% - +5% |
Leakage Current |
≤0.25mA |
Insulation Resistance |
≥200MΩ |
Type |
PA66+ glass fibre, temperature resistance≥250℃ |
Snap Action Thermostat |
16A, installed close to the heating tube’s heating circuit |
Shield Thermistor |
PTC |
Grounding Type |
Spot-Weld |
Water Inlet & Outlet |
Φ10mm |
Heating Tube Dimention |
Φ20mm*120mm |
Product Application
JD20 is the ideal electric accessories that will be used in home electrical appliances, such as water dispenser, water purifier, coffee machine, milk machine etc.