hot water recirculation pump

  hot water recirculation pump 

 

Detailed introduction 
 

1. 1. WL series vertical high temperature pump is axial suction, vertical high temperature medium transferring circulating pump. The transferring medium is the water without the particle and fiber, such as water, conduction oil and glycol and so on. 
2. 2. The pump’s entrance soak in the circulating liquid, the exit adopts pipe screw connection, which has the advantages of no leak, fine appearance, high pump head, fast flowing speed, low noisy, stable performance. 
3. 3. This pump is widely used in rubber injection machine and equipment, mold temperature controller, machine tool cooling system. 

 Features 

1. 1. The material of the pump is all the copper, fine appearance. 
2. 2. Precise connection, stable performance. 
3. 3. Low noisy , slight vibration 
4. 4. High lift fast flowing speed 
5. 5. The pump’s head is soaked in the circulating medium, which make sure no leak. 
6. 6. Headstand installing style, saving room, easy to repair and maintenance. 

 Application scope

1. 1. Rubber extruding equipments 
2. 2. Machine tool cooling system 
3. 3. Mold temperature controller 
4. 4. Rubber injection machine 

 Material 

1. 1. Pump body: copper 
2. 2. Axle sleeve: graphite 
3. 3. Axis : 2cr13
4. 4. Insulation level of the motor : F level 
5. 5. Impeller: copper 
6. 6. Protection level : IP54

 Using condition 

High temperature water: + 5 ℃ ~ + 95 ℃

High temperature conduction oil : +5 ℃ ~ + 200 ℃

Glycol : -30 ℃ ~ + 180 ℃

Technical parameter 
 

Installing Sketch 
 

Performance chart 
 

RGP high lift head centrifugal oil pump

 high temperature oil pump for compressor

RGP series high temperature centrifugal pump is widely used in TCL, leather processing machine, reaction kettle , wood processing machine and other area . The pump transfer the non flammable and explosion liquid without the particles, fiber.

Single Stage Impeller , Axial Suction , Radial water Absorption

Compact Structure, Water and Pump and Motor Connecting directly ,Coaxial Mounting .

Fine performance , High Efficiency

Fast Flow , High Temperature Resistant ,Stable sealing performance

Low Noisy ,Small Vibration

Easy to Remove , Low repairing Cost

 Testing Base: The above characteristic testing is based on the water transferring with the normal speed under 20 degrees. The error of the capacity and head is about 10%, characters ‘error is about 10%. The pump characters change according to the difference of the liquid mediums’ proportion and density.