MJ-JD82 check Valve Magneti Valve G1/2" for Washmachine

TECHNICAL SPECIFICATIONS:

Rate Voltage:                                         AC220V(customized from 6V-220V)

Coil Resistance:                                    4.75KΩ±0.25Ω(20°C)

Switch Mode:                            direct current pulse

                                                  alternating current coutinuous

Operating Pressure:                  0.02Mpa-0.8Mp

Suitable Fluid:                           Water

Fluid Temperature:                    1°C-75°C

Responding Time:                     open≤0.15s   close≤0.3s

Electricity Strength:                   can bear AC2500v between conductor and on-conductor

Radiating will not be occurred within 1 min

Resistance Performance:                >100Mωbetween conductor and non-conductorer

Flow Character:                          0.02Mpa≥5L/min   0.1Mpa≥12L/min   0.8Mpa≥35L/min

Working Life:                              ≥1000000 times

Inlet Connection:                        G1/2" - G 1/2" – others on request

Filter:                                          PP

MOJO SENSOR also provides solutions for Magnetic Water Inlet/Outlet Valve

PRODUCT AND SAFETY FEATURES

-    Normally open, pilot operated, diaphragm-type valve
-    Made of non-corrosive and non-toxic materials
-    Suitable for potable water
-    Designed and developed to meet also harsh working environments
-    Smallest inlet valve on the market
-    Does not have external moving parts
-    Easy to install
-    Fast operation; no partly closed valve position
-    Customization is possible for specific applications

Available in other Models or on Customer Request.

Solenoid valve specifications are as follows:

1. Normally closed type {that electricity on the water flow, power off ,water stop}

2. Pressure: thas has two type: inlet valve and water drain valve, inlet valve for pressure valve, drain valve for no pressure valve.

3. Voltage specification, this have DC12V/DC24V/AC220V three kinds of commonly used voltage specifications.(Remark with which one you need,if no remark,we all think you need is DC12V).

4. The interface methods: G1/2 male thread ,diameter 20mm, parallel installation (level 180 degrees)

  Specifications:

1. Normally open type- refers to the electricity on then no water flow,the valve is close.

2. Normally closed type- refers to the electricity on then water flow,the valve is open.

3. The inlet valve - refers to the use in 0.02 -0.8 MPa pressure environment.

4. The water drain valve - refers to the use in the 400 mm or less work pressure water (no water or zero pressure)

Type and rated parameters:

1. Style: guide (one-way) solenoid valve (also called packless pilot valve action or solenoid valve).

2. The rated voltage: dc 3 v / 6 v / 12 v / 24 v / 36 v ac 220 v.

3. The current rating: 3 v - 550 ma ma / 12 v / 6 v - 430-300 ma ma / 36 v / 24 v - 220-180 ma

4. Work style: quotas (namely, the duty cycle can work continuously for 2 hours or so.

5. Insulation class: E insulation.

6. The use of fluid (0-75 ° C) water.

7. Use water pressure: 0.02-0.02 Mpa.

8. The flow characteristic of the water:

0.02 mpa > L/min;0.02 mpa > 11 L/min; 0.30 mpa > 18 L/min;0.80 mpa > 32 L/min;

9. The coil resistance: 37 Ω +- 0.25 Ω (20 °C).

10. Response time: 0.15 s or less close 0.3 s or less.

11. Electrical intensity: should be able to withstand AC2500V voltage between conductors and non-conductors, 1 min not breakdown and produce the phenomenon such as flashover