Brand Name: MOJO
Model Number: MJ-10120S
Place of Origin: Guangdong, China (Mainland)
NOTE:
We can according to different demand customed-make different liquid level switch~If you have any need pls feel easy to chat with us~We will try to give you best serves~
Product character:
The principle of operation
Liquid level sensors by the composition of reed switches andfloat, reed switch encapsulated in the guide, and a ring mag-net is equipped in the float, w-hen the float moves up and d-own with the measured of liquid level,and the internal magnet to attract magnetic reed switch contact action,so that it can to detect the liquid level position.
Installation instructions
1.Should be mounted away from the inlet, or switch will caused malfunction by the fluctuations in intake.
2.The load must be controlled circuit capacity with float switch contacts to match.
3.The proportion of liquid to be measured must be greater than the proportion of float.
4.Float action points have been ordered by the customer requirements adjusted at the factory, Please do not adjust the float position.
Date scan |
1A1 |
2A1 |
Max Contact Rating |
10W |
50W |
Max Switching Voltage |
100VAC/100VDC |
300VAC/350VDC |
Max Switching Current |
0.5A |
DC0.7A/AC0.5A |
Max Breakdown Voltage |
110V |
300VAC/350VDC |
Max Carry Current |
1.0A |
2.5A |
Max Contact Resistance |
100mΩ |
100mΩ |
Temperature range |
-10~+85°C |
-10~+85°C |
Float Ball Materia |
PP |
PP |
Float Body Material |
PP |
PP |
Mounting |
Top or bottom of the vertical installation |
Installation dimensions |
--- |
Operating Characteristics |
Floating on or fall on (optional) |
Working Medium |
Water, oil, chemical media |
Temperature range |
–10~+200°C |
Pressure range |
0.2MPa |
Routine maintenance
Periodically clear the guide rod and float on the dirt (as the media cycle may be).
Check for the loose buckle.