CTF 010 D65 2 5 inch stainless steel ball valve with electric actuator 220V 50HZ for water treatment

CTF-010 DN32 1.25 inch stainless steel 2 way valve with electric actuator 220V/50HZ 1.6MPA 16PN

Specifications

3inch motorized valve 220V/50HZ UPVC stainless steel 1.6MPA for automatic control system

2-way electric ball valve CTF-002 220v UPVC and SS material CTF series UPVC electric valve for smart table support for Small equipment for automatic control,agricultural water conservation

Parameters
Actuator code: CTF series
Voltage:DC12V,DC24V, AC220V,
Torque output: 25 NM- 100NM
Working Pressure: 0-1.6 Mpa(16bar)
Temperature:0 to 100 Degree Celsius
Size Scope: ball valve,15-65(mm); butterfly valve 40-125(mm)
Open/Close time: 10 -- 25sec
Number of wires: 2-5 wires
Protection class : IP67

Series CTF actuators with its smart design, wonderful shape, are suitable for many kinds of vavles. It has proved its superior quality for its stable nature, and good quality. These actuators are return type and suitable to DC or AC (will be set in the factory), can be controlled by outside cut off. This actuator run low cost and does not need to be maintained.

DC or AC (should be set in the factory), control mode is flexible, convenient to microprocessor and realize the automatic control by PLC.
Manual/electrically operated integrated design, Simply to operate.
Large output torque, inner protecting overheated device, working stable and reliable.
Low noise, good leak-proof. Through the coupling, the valve will be installed and operated easily.

Scope of application:

IC card water meter, heat meter, central air-conditioning fan coil, fire sprinkler, sanitary ware, smart table support, institutions of higher learning water-saving systems, automatic control system.