Rexroth A2F A2FO A2FM series hydraulic piston motor pump

 Rexroth  A2F A2FO A2FM series hydraulic piston motor pump 

Rexroth Type A2F series A2F45R2P1 Fixed Displacement Axial Piston Pump / Motor

A2F6, A2F10, A2F12, A2F23, A2F28, A2F45, A2F55, A2F63, 
A2F80, A2F107, A2F125, A2F160, A2F200, A2F250, A2F355, A2F500
Norminal Pressure: 350 bar.   Peak pressure: 400 bar
Sample: A2F 55 R 2 P 1

Axial piston unit of bent axis design with fixed displacement, for use as either pump or motor in hydrostatic drives, in open or closed circuit.
If operated as a pump, the flow is proportional to the drive speed and displacement. If operated as a motor, the output speed is proportional to the swept volume and inversely proportional to displacement. The output torque increases with the pressure drop between the high and low pressure sides.

Features:

·Equivalent with original Rexroth same model.
·High performance rotary group with well-proven spherical control area with the advantages, self-centering low peripheral speed, high efficiency.
·Robust rolling bearing endure long service life.
·Drive shaft capable of adopting radial loading.

Model A2FO Axial Piston Hydraulic Pump

A2FO10, A2FO12, A2FO16, A2FO23, A2FO28, A2FO32, A2FO45, A2FO56, A2FO63, A2FO80, A2FO90, A2FO107, A2FO125, A2FO160, A2FO180 A2FO250 (cc/rev.) series.

The fixed displacement pump A2FO of axial piston, bent axis design is made suitable for hydraulic drives in open circuits.

Output flow is proportional to drive speed and displacement.

These pumps are suitable for use in mobile or industrial applications. The drive shaft bearings are designed to give the

service life expected in these areas of operation.

Careful selection of the displacements offered, permit sizes to be matched to practically every application.

– Favorable power / weight ratio

– Compact and economic design

– Optimum efficiency

– One piece pistons with piston rings

– Patented cylinder block drive system