30 Tons of Hydraulic Cutting Machine from Shanghai YiYou

30 Tons of Hydraulic Cutting Machine from Shanghai YiYou

Hydraulic cutting machine

Application:
The machine is suitable for forming die cutter for leather, plastic, nylon cloth, paper, cotton and synthetic fiber, forming cutting operation of non-metallic materials, particularly applicable to a wide material layer or multilayer cutting blanking.
 
Main features:
l All the sliding parts of this machine by the hydraulic system for oil lubrication, reducing wear and prolong the service life of the machine.
l Automatic slow cutting when quick clamp down on knife mold cutting, cutting no size error between the ground floor.
l The machine structure changes when the design for the users no worry about possible oil leakage of the machine.
l Due to the motor and pump extraposition, good ventilating and cooling conditions, safety operation, long service life.
l The setting of the knife mold is rapid, accurate and easy to learn.
l Small motor power, low energy consumption.
 
Main Technical Parameters:
Mode: HW-30T,HW-35T,HW-50T,HW-60T,Unilateral automatic feed,HW-80T Bilateral       automatic feed,HW-100T Bilateral automatic feed
Maximum cutting force: 300KN,350KN,500KN,600KN,800KN,1000KN
Distance between upper press plate and workbench: 50-160mm,50-160mm,55-                                                  180mm,50-200mm,50-200mm,50-                                                  200mm
Area of workbench: 500×1600mm 500×1250mm,610×1600mm 610×1250mm
                   710×1600mm 710×1250mm,800×1600mm 900×1250mm
                   800×1600mm 800×1250mm,900×1600mm 900×1250mm
Main motor power: 2.2kw,2.2kw,3kw,5.5kw,7.5kw,11kw
Hydraulic pressure oil mass: 150L,180L,200L,220L,320L,330L

MORE<<<<<<<<<<<<<<<<<<<<<<<<http://www.hwblistermachine.com/hydraulic-cutting-machine.html