Mechanical Control Thermostat for Heating

Mechanical Control Thermostat for Heating

1. Introduction:

The thermostat acquires the room temperature with its built-in gas-filled diaphragm
The heating contact will close when the room temperature falls below the selected setpoint in heating mode 
The cooling contact will close when the room temperature exceeds the selected setpoint in cooling mode

2. Application:

In conjunction with fans and valves, RTC10… is designed to control the valve in heating or cooling systems to maintain the desired setpoint temperature in Commercial buildings, Residential buildings, Light industrial buildings…

3. Features:

- Built-in gas-filled diaphragm sensing element
- On/off control output for valve actuators
- Manual control of heating, cooling, fan operation
- Thermometer for current room temperature 
- Maintenance-free design 

4. Technical Parameter:

- Voltage : AC230V (AC110V / AC24V available)
- Power consumption : 3 W
- Setting range : 10℃~30℃
- Switching differential : ±1 K
- Ambient temperature : -5~50℃
- Protective housing : IP20
- Housing material : self-extinguishing PC
- Sensor : Gas-filled diaphragm

5. Secletion Table:

6. Specification:

7. Contact Information:

Fujian Jiejia Imp & Exp Co., Limited

No.1203 | Yuantai Building

Wenling Road |Fengze District | Quanzhou City

Fujian Province | China | 362000

- Tel.: +86 - 595 - 22981856

- Fax.: +86 - 595 - 22971856

- Mobile: +86 - 15659079803

- Email: max (at) zaykatrade.com