Silica Gel Dehumidifier Rotor 750mmx200mm

  Regular Desiccant Rotor : PSS

    PSS rotor is used for normal humidity and low dew point operation in high regeneration temperature, and suitable for most dehumidification applications.

    It has cost-effective, good dehumidification performance in wide range of applications.

    General Partition 1 : 3

1. Unique Moisture Adsorption

Relative humidity 10% ~ 40%, Dew point -50℃ ~ -75℃

2. Advanced Manufacturing Techniques

Axis Perpendicularity error precision ±0.1mm（Below 1500mm）, ±0.2~0.3mm（1500~3000mm）, 

Improve tightness, reduce friction, reduce the probability of rotor cracking.

3. Professional Surface Treatment

Adopt international standard environmental paint with water-resistant, high temperature resistance, strong weather resistance, anti-corrosion, no odor and high hardness.

4. High Surface Strength

500N/㎝²{50kgf/㎝²}

5. Water Washable

Silica gel does not dissolve in water and any solvent. Non-toxic and tasteless. Therefore, rinse and maintain with water and organic solvent.

6. Variety Construction

It is recommended that using the split type for diameter ≥ 2200mm, due to transporation problems. It's easy way to assemble upper and lower parts on site.

If the space is narrow, the rotor can be shaped into fans to assemble.

7. Long Life Service

We made the life test and calculated use life according to Arrhenius theoretical formula. As the combination of losts of repeated experiments and accurate theoretical calculation, serivice life can be as long as 10 ~ 12 years.

Besides standard dimensions (Diameter and Thickness), non-standard rotors can be customized according to customers' requiremens, such as 50mm, 65mm, 100mm and 150mm.

Accessories - Cassette, Flange, etc

Cassette's material

(1) Cold drawn square tube, high temperature paint

(2) Stainless steel square tube

Gear motor

Applicable environment is -10℃ ~ 40℃), Motor can be customized.

If the rotor is equipped with flange, flange is:

(1) Hot dip galvanized angle steel flange: 30*30mm or 40*40mm

(2) Stainless steel angle steel flange: 30*30mm or 40*40mm