Convector coil

 Flygrow  manufactures copper tube –aluminum fin evaporator and condenser coils fin bare and hydrophobic  fin material range from 0.1mm to 0.19mm thickness using which from 5mm to 15.88mm  in both  smooth and internally Grooved  tubes. We have various  thicknesses of copper tubes to meet different design pressures  including the design and pressure requirements of natural refrigerants.

Specifications

Typeical benefits and advantages:

• Well distributed liquid dispensing of windward area ofcondenser coil
• High quality mechanical expanding or super high pressinghydraulic expanding between copper tube and fins, tight contacting andoptimized heat exchanging.
• Free pitch distance selection, reduce the frost affection inlow temperature.
• With single or double reverse-flow system, small waterresistance, good heat exchanging
• With super high temperature vacuum drying, ensure innerwithout impurity or water substance.

Usage:
Productsare suitable for R134A, R22, R404A, R407C, and CO2 refrigerant.

Widely used for commercial refrigerators and freezers, commercial showcase cabinet,air-conditioning systems, dehumidifier, ice maker etc.

Material:

copper tube, aluminum fins, galvanized steel bracket ifneed
- Copper tube: made by Hailiang China,Φ5,Φ7mm,Φ7.94,Φ9.52, Φ12.7, Φ15.88, inner thread groove or smooth tube
- Aluminum foil: blue or other color hydrophilic, or uncoated bare
- Fin type: louver, flat, corrugated or slit fin
- Side plate: galvanized steel plate, stainless steel, aluminum or brass.

Production process:
Tube bending, punching fin, tube expanding, fins installation, drying, welding,leakage test, tube bending, quality inspection, packing

FQC & OQC:
Tightness testing: gas testing under 3.0Mpa air pressure

Leakage testing: water leakagetesting

Available pins & geometry: