Heat insulation PU Panel cold room with cold room sliding door

Sliding doors of “RuiBing”, including(H/HR/L/T/P five types),which has received the national patent. Our patent number is 201120339320.1

1, Panel material:

⑴ white steel with "Roller lines"          (coating protective film )

⑵304# stainless steel with “wiredrawing”   (coating protective film )

Comments:

①"Roller lines" :that is using special equipment to roll into both sides of the steel to form reinforcing rib.

②"wiredrawing": that is using special equipment to polish the panel surface and grind out some vertical lines to make it look better.

2, Size selection: custom design

3, Opening side: "left " and "right"

4, Conventional configuration and characteristics  :

① The door adopts our independent research and design(Our own intellectual property rights.), using advanced polyurethane (PU) high pressure injection foaming technology. The appearance is integrated, neat and beautiful.

② The door adopt professional doorpost (PVC) and use its internal available slot to add ribbon heater. The appearance is neat and integral.

③ Equipped with aluminum alloy special track, which do not produce friction causing sparks.

④Equipped with escaping device in the cold room, which use "luminous handwheel in the darkness" making it easily operated.

⑤Stainless steel parts make the door clean and durable.

⑥ While open the door, the door move outward and raise at the same time without friction between doorseal and doorpost.

⑦While close the door, the door approach towards the doorpost and set at the same time, then the doorseal connect with the doorpost closely.

5,Types