C1WO109 Flux Coated Brazing Rods Silver Base Filler Metal

         Flux Coated Brazing rod / wire is made from coating a layer of firm flux on the surface of a well formulated filler metal rod / wire. The attached flux is carefully selected to match the filler metal with high activity, non-corrosion, no moisture absorption. This perfect combination of flux and filler metal can simplify and eliminate a separate fluxing operation, thus profoundly improves the efficiency of brazing process. This conveniently self-coated rod / wire that is great for hard to reach braze joints, where it is difficult to inserting flux. It is widely used in the industries of refrigerator, air conditioning, radiator, automobile parts and tools, etc.

        The flux layer is well attached on the surface of the metal rod with good ductility to prevent cracking and striping with 100% assurance. The allowance angle of bending can be larger than 30 degree. Comparing to the flux cored brazing rod / wire, attaching the flux on the surface engages good visibility of the flux vacancy. The layer is demanded to be uniform, stable, and well adhered for expiration duration of one year. The uncertainty of the diameter of this product is strictly controlled to 0.1 mm.

        Gathering numerous test results from industrial research, we confirmed the ratio of flux to filler metal to design the product, making sure the continuity and efficiency.

        There are three main kinds of flux coated brazing rod / wire according to different utilities, namely, silver flux coated brazing rod / wire, aluminum flux coated brazing rod / wire, and copper flux coated brazing rod / wire.

Advantages of Flux Coated and Flux Cored Alloy Filler Metals:

Labor savings - Simplifies and eliminates a separate fluxing operation.

Produces stronger joints - Less flux entrapped inside the joint, leaving the braze joints with improved strength because the use of coated and cored products has been found to reduce flux inclusions at the joint interface.

Improved operations - The all in one product streamlines customer's supply chain, eliminating the need to buy flux and alloy, while also automating brazing and assembly with high velocity, single piece flow.

Multiple uses - Flux coating can be used for coating of bulk strip, rods, engineered preforms and discrete parts.

Reduced costs - Reduction of post braze cleaning and secondary finishing operations, thereby reducing overall metal-joining costs.

Waste reduction - Flux coating reduces the waste of too little or too much flux, and the consistent application of flux and alloy improves joint quality.

Exposure reduction - Flux contamination within components on plant equipment and in the waste water is dramatically reduced. Flux exposure to brazing personnel is reduced.  

        Yantai TiBright Welding Materials Co. Ltd., founded in 2000, is a professional developer and international supplier of inclusive brazing materials, equipment, and consultant. TiBright has hundreds of products for different applications. Customized products are also available for specific purposes.

         When choose from our product library, please check out our recommended product list, If you have any questions, please let us know, We will try our best to satisfy your inquiry. Sometimes we need our customers to try different samples to make the perfect decision. Generally, we need to know the following information to choose a right product for you. 

1. Materials of your parenting parts (to-be-brazed parts). 

2. Heating methods. (eg. flame, induction, vacuum furnace etc. )

3. Atmosphere of application. (eg. room air, protective inert gas, reductive gas, vacuum, etc.)

4. Dimensions of your parts. Photos or graphs are preferred. (Different dimensions require different procedures.)

5. Current solution. (eg. brazing materials, equipment, procedures, etc.)

6. The reasons of searching new solution. (eg. price, strength, applicability, etc.)

7. Industry of your application. (Help us refer to similar examples.)

Normal packaging:

Other packing can be customized according to customer's requirement

         With hundreds of products in our product library, TiBright is a professional developer and international supplier of inclusive brazing materials, equipment, and consultant.

One highlight of our services is that we provide customized products specially designed for specific customers. We have a lot of successful cases in which the customers had the products suitable for their own procedures, environment and operation routines perfectly.
      We also provide entire brazing solution for customers to solve all the problems related to brazing process. We provide consultant for customers with complicated applications and innovative demand.

      About sixty percent of our equipment and devices are designed and crafted in our own machine workshop, which engaged us the ability of prompt reaction towards new updates from customers. We also produce specially designed brazing tools and machines. We often develop products together with our customers for their individual needs.