BLR/OSH Helical Oil Separator

GENERAL DEFINITION

• Helical oil separators are designed for correct separation of oil in discharge gas and ensure recycling of oil into  compressor in the most effective way. The purpose is to keep carter’s oil level, minimize possible excessive oil circulation, and increase the system’s output.
• Helical type oil separators have more effective oil separation capacity compared to conventional oil separators.
• Helical type oil separators can be used in various systems and multiple compressors.
• These oil separators are designed for low-pressure systems, scroll and piston compressors
• They must not be used for screw and rotary compressors.
• Helical oil separators are products with buoy systems, and they undergo very accurate production process.
• All active parts working in buoy system are fully made of stainless material.
• Buoy system is protected against pressure and circulation formed within the product.
• Any contamination can be easily caught by magnet in buoy part at oil output point, and thus it is ensured that valve operates in cleaner media.
• Buoy flange system may be easily dismantled and installed thanks to special foot connection.
•  Inner surface of oil separator is wound by stainless filter, and thus heavy oil particles collide with filters along spiral path, and separated from discharge gas.

Connection Parts

• We determined Input and Output connections according to volume of products.
• ODS connection is used in standard products.
• Different connection may be used upon request.

DRAWING&PICTURE

 Floating System

1 - Inlet Connection

2 - Outlet Connection

3 - Oil Return Connection ( 3/8" SAE )    

4 - Service Unyon ( Flug )

5 - Flange Syste

6 - Screw ( M10 )

  Form of using within the system and internal design are clearly shown in above

TECHNICAL DATA

•  Working Pressure[PS] : 33Bar
• Test Pressure [PT]  : 48Bar
• Allowable Temperature [TS]: Min.- 10°C/Max.-130°C
• Color [RAL] : 5009
• General Tolerans [mm]: ± 5

Contact information