NEW floor heating thermostat; CE 3A/16A programmable Room thermostat

underfloor heating thermostat
heating digital thermostat
electric thermostat for floor heating
high quanlity with competitive price

Large LCD digital thermostat
85-250 VAC / 24VAC ( option)
Type one Current 3A
Type two Current 16A
Electric thermostat for floor heating or hot water radiator heating systems

Introduction

BYL Heating thermostat with LCD screen, which has manual mode or programmable.

The thermostat is recommended for the control of electric heating device

or on/off valve actuator in hydronic underfloor heating. 

Basic function: 
1. Recommended for control of underfloor heating and electrical heating. 
2. Electronic on/off control up to 3600W, 16A or 6000W, 30A 
3. Setting daily 4 periods of programmable, time settings, Kinds of periods of time modes. 5+2 / 6+1 / 7days

4. Large Back-lit display, LED screen, easy-to-see and read 

5. Infrared remote-controlled function(option) 
6. Built-in interrupter 
7. Two work mode switchover: ( programmable ,non programmable) 
8. Display temperature recalibrates 
9. Low temperature protection function 
10. Surveys, display and set room temperature 
11. Memory function: Parameters are permanently held in memory and retained during power outages 
12. Anti-freezing protection 
13.2-sensor: Built-in Room sensor , floor limiter sensor  ( floor limiter sensor is option) 

Product Specifications: 
Voltage: 110(± 10%)VAC / 220(± 10%, -15%)VAC, 50/60Hz  24VAC ( option)  
Differential Temperature: 1 ° C Max 
Setting Temperature Range: 5° C~35° C 

External Limitation: 5°C~60°C( factory setting 35°C) 
Mounting: Mounts directly onto wall or wall-box 
Temperature range: 0° C - 40 ° C 
Sensor type: NTC 
Color: White ivory 
Relative humidity: < 85% (23 ° C) 

Housing material: anti-flammable PC

Dimensions: 86mm× 86mm× 13mm(H/W/D) 

Product Dimensions (unit:MM)

Installation guide

Step 1: Separate the Polycarbonate Bezel unit from the LCD screen.          A: Hook          B: Buckle

Step 2: In Laka buckle, outside at the same time lift up the movement, it is necessary to separate the iron with the movement.

Step 3: Fixing plate with screws to the wall to ensure that the de-energized state product back wiring diagram connected electrical lines.

Combinations: Align the four hooks, press down on the movement, the iron plate with movement combinations, and then fasten the frame.

About Packing 

50 sets per carton with paper box ,carton size:51x36x22 cm;

40 sets per carton for blister packing, carton size : 48x35x29 cm;

100 pieces per carton for only thermostatic head, cartons size: 40x30x30 cm;

60 pieces per carton for only thermostatic valve body, carton size: 41x25.5x26 cm;

About 20000 sets /20” container with blister packing;

About 25000 sets/20” container with carton box;

Pallet packing is available. 

About Guarantee:

2 Years guarantee counted from the days arrived in your warehouse.