Brand Name: AOHONG
Model Number: 6*6mm-50*50mm
Place of Origin: China
Kevlar Packing (Aramid Packing)
Aramid Packing, it is Braided from high quality Dupont Aramid/Kevlar fiber with PTFE Impregnation and lubricant additive. Extremely hard wearing. It shows good chemical resistance, high elasticity and very low cold flow. It is wear resistant but may damage the shaft if not used properly. A minimum shaft hardness of 60HRC is therefore recommended. Compared with other kinds of packing, it can resist more severe media and higher pressure. The packing is also lubricated with a silicone-based compound for quick and easy break-in.
Max temperature |
-100~+280°C |
Max pressure |
25Bar 100Bar 200Bar |
Density |
1.4g/cm3 |
Size |
From 6 x 6 mm to 50 x 50mm |
PH range |
2~12 |
Packaging |
In coils of 5 or 10 kg, other weight on request; as precut length |