Bently Nevada 330106-05-30-05-02-00 Proximity Probe

Sandy Lin   
Email:  unity@mvme.cn    |    Mob/Whatsapp :+ 86 180 20776786
Tel   : +86 592 5165503    |    Skype:  onlywnn_1
Fax  : +86 592 5165561    |    Wechat : mooreplc  

Bently Nevada 330106-05-30-05-02-00 Proximity Probe

Description
The 3300 XL NSv* Proximity Transducer system is intended for use with
centrifugal air compressors, refrigeration compressors, process gas compressors
and other machines with tight installation requirements. The 3300 XL NSv
Proximity Transducer System consists of:

a 3300 NSv probe

a 3300 NSv extension cable

a 3300 XL NSv Proximitor* Sensor.1
The primary uses for the 3300 XL NSv Transducer System are for areas where
counter bore, sideview or rearview restrictions limit the use of standard Bently
Nevada* 3300 and 3300 XL 5 and 8 mm Transducer Systems. It is also ideal for
small target applications, such as measuring radial vibration on shafts smaller
than 51 mm (2 in) or axial position on flat targets smaller than 15 mm (0.6 in). It
is primarily used in the following applications on fluid-filmed bearing machines
where a small shaft or reduced side-view is present:

Radial vibration and radial position measurements

Axial (thrust) position measurements

Tachometer and zero speed measurements

Phase reference (Keyphasor*) signals
The 3300 XL NSv Transducer System design allows it to replace both the 3300
RAM Transducer Systems and the 3000-series or 7000-series 190 Transducer
System. Upgrades from the 3300 RAM system to the 3300 XL NSv system may
use the existing probe, extension cable, and monitoring system with 3300 XL NSv
Proximitor Sensor. Upgrades from the 3000-series or 7000-series Transducer
System must replace the probe, extension cable and Proximitor Sensor with NSv
components.
The 3300 XL NSv Transducer System has an Average Scale Factor of 7.87 V/mm
(200 mV/mil), which is the most common output for eddy current transducers. Its
enhanced side-view and small target characteristics give it a shorter linear
range than the Bently Nevada 3300 XL-series 5 and 8 mm Transducer System.
With The 1.5 mm (60 mils) of linear range exceeds the linear range of the 3000-
series 190 Transducer System. 
 

Rockwell: Allen-Bradley
1) ControlLogix 1756 series controller
2) CompactLogix 1769 series controller
3) SLC 500 1747 1746 Series Controller
4) PLC-5 1771 1785 series controller

5) ProSoft :MVI69/PS69/MVI56/MVI94/MVI71/MVI46/3150  

6) ICS TRIPLEX trusted system

ABB: 
1) AC800M series controller I/O module
2) AC800F series controller module
3) AC31 series controller module
4) 800xA series modules
5) Bailey INFI 90 module
6) DSQC robot module spare parts
7) Advant OCS system spare parts

8) H&B Freelance

Bentley Nevada : 

1) Bently 3500 Monitoring system,

2) Bently 3300 Monitoring system,